Abstract:Accumulation of millions of tons of waste printed circuit boards powders (WPCBP) ate causing serious environmental pollution as it contains lots of toxicant substances. This work had explored the potential use of WPCBP as a reinforcement to replace wood flour (WF) for engineering value added high-density polyethylene (HDPE)-wood composites. Pyrolysis gas chromatography-mass spectrometry, fourier transform infrared, thermos-gravimetric analysis, scanning electron microscopy (SEM) and X ray fluorescence were selected to analyze the physico-chemical properties of WPCBP, and the results showed that the WPCBP contained bromine flame retardants and transition metals. Incorporating WPCBP into HDPE-wood composites improved the notched impact strength, water absorption rates "and rheological properties, while it reduced the oxidation induction time (OIT) which was due to the transition metals in WPCBP. When the content of WPCBP and WF fixed at 20 wt % and 10 wt %, the addition of KH-550 and PE-g-MAH simultaneously improved the tensile strength and notched impact strength of the composites which were enhanced by 64.4% and 66.1% compared to those of unmodified samples. All composites containing modifiers showed higher storage modulus and higher interfacial adhesion between the filler and matrix with respect to the original composites. SEM studies revealed that the addition of KH-550 and PE-g-MAH improved the interfacial adhesion between fillers and HDPE matrix. The value of this work lies in the fact that apparent mechanical properties improvement of HDPE composites has been achieved by the incorporation of PE-g-MAH and KH-550 modified WPCBP, which might be fruitful for reducing the production cost of the HDPE-wood composites and brought forward a new way to reuse WPCBP for a sustainable world. (C) 2017 Elsevier Ltd. All rights reserved.

Incorporation of Xuan-paper waste residue in red mud/waste polyethylene composites

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Characteristics of paper mill sludge-wood fiber-high-density polyethylene composites

The Reinforcing Effect of Waste Polyester Fiber on Recycled Polyethylene

A New Insight into Utilization of Red Mud in Poly(vinyl Chloride) Composites Via Surface Modification and Toughening Modulation to Attain Performance Optimization

Sustainable Utilization of Waste Printed Circuit Boards Powders in Hdpe-Wood Composites: Synergistic Effects of Multicomponents on Structure and Properties

Surface Modification of Shell Waste and Its Application in Polypropylene Composites

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Effect of recycled polyester fiber reinforcement on the mechanical behavior and microstructure of red mud-improved volcanic ash

The Reinforcing Effect of Waste Corrugated Paper Fiber on Polylactic Acid

Effects of Red Mud on Rheological, Crystalline, and Mechanical Properties of Red Mud/pbat Composites

Effects of waste rubber particles on workability, mechanical, and sound insulation properties of recycled aggregate mortar

High-value utilisation of ceramic waste powder in PVC-based composite and basalt fibre reinforcement effect on its performance

Ultra-strong and environmentally friendly waste polyvinyl chloride/paper biocomposites

High-value utilization method of digital printing waste paper fibers-Co-blending filled HDPE composites and performance improvement

Production of sustainable wood-plastic composites from the nonmetals in waste printed circuit boards: Excellent physical performance achieved by solid-state shear milling

High value-added utilization of artificial marble wastes and potential applications in biodegradable sustainable packaging

Enhancement and Compatibilization of Waste-Sourced Biocomposites Through Elastomer Blending and Matrix Grafting Modification

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Fabrication of flame‐retardant wood plastic composites based on wasted bean dregs with recycled <scp>PE</scp> via mechanochemical crosslinking

Toughening and reinforcing waste polypropylene with POE / nano‐SiO 2 under elongational flow