Abstract:One of the greatest challenges for using microbial fuel cells (MFCs) for wastewater treatment is creating a scalable architecture that provides large surface areas for oxygen reduction at the cathode and bacteria growth on the anode. We demonstrate here a scalable cathode concept by showing that a tubular ultrafiltration membrane with a conductive graphite coating and a nonprecious metal catalyst (CoTMPP) can be used to produce power in an MFC. Using a carbon paper anode (surface area Aan = 7 cm2, surface area per reactor volume Aan,s = 25 m2/m3), an MFC with two 3-cm tube cathodes (Acat = 27 cm2, Acat,s = 84 m2/m3) generated up to 8.8 W/m3 (403 mW/m2) using glucose [0.8 g/L in a 50 mM phosphate buffer solution (PBS)], which was only slightly less than that produced using a carbon paper cathode with a Pt catalyst (9.9 W/m3, 394 mW/m2; Acat= 7 cm2, Acat,s= 25 m2/m3). Coulombic efficiencies (CEs) with carbon paper anodes were 25-40% with tube cathodes (CoTMPP), compared to 7-19% with a carbon paper cathode. When a high-surface-area graphite brush anode was used (Aan = 2235 cm2, Aan,s = 7700 m2/m3) with two tube cathodes placed inside the reactor (Acat = 27 cm2, Acas, = 93 m2/m3), the MFC produced 17.7 W/m3 with a CE = 70-74% (200 mM PBS). Further increases in the surface area of the tube cathodes to 54 cm2 (120 m2/m3) increased the total power output (from 0.51 to 0.83 mW), but the increase in volume resulted in a constant volumetric power density (approximately 18 W/m3). These results demonstrate that an MFC design using tubular cathodes coated with nonprecious metal catalysts, and brush anodes, is a promising architecture that is intrinsically scalable for creating larger systems. Further increases in power output will be possible through the development of cathodes with lower internal resistances.

Stacked all-graphite microfluidic microbial fuel cells

All-graphite microchannel microbial fuel cells with high-power generation and conversion efficiency

A novel pilot-scale stacked microbial fuel cell for efficient electricity generation and wastewater treatment.

A high performance membraneless microfluidic microbial fuel cell for stable, long-term benchtop operation under strong flow

A miniaturized microbial fuel cell with three-dimensional graphene macroporous scaffold anode demonstrating a record power density of over 10 000 W m(-3) .

New architecture for modulization of membraneless and single-chambered microbial fuel cell using a bipolar plate-electrode assembly (BEA)

Scale-up of Membrane-Free Single-Chamber Microbial Fuel Cells

Development of Integrated Packaged Single Fuel Cell Short Stack Based on Titanium Metal Plates for Mobile Power Generation

Scalable air cathode microbial fuel cells using glass fiber separators, plastic mesh supporters, and graphite fiber brush anodes.

Microbial fuel cells with an integrated spacer and separate anode and cathode modules

Scale-up and stack performance of single-chamber microbial fuel cells with activated carbon air cathodes

Tubular Membrane Cathodes for Scalable Power Generation in Microbial Fuel Cells.

Intermittent Contact of Fluidized Anode Particles Containing Exoelectrogenic Biofilms for Continuous Power Generation in Microbial Fuel Cells

Performance Assessment of Multi-Electrodes Reactors for Scaling-up Microbial Fuel Cells

Comparative study of different hydro-dynamic flow in microbial fuel cell stacks

Multiparameter optimization of microbial fuel cell outputs using linear sweep voltammetry and microfluidics

A Graphite-Granule Membrane-Less Tubular Air-Cathode Microbial Fuel Cell for Power Generation under Continuously Operational Conditions

Optimization of Microbial a Fuel Cell with Linear Sweep Voltammetry and Microfluidics

Miniaturized Ceramic-Based Microbial Fuel Cell for Efficient Power Generation From Urine and Stack Development

Graphite Fiber Brush Anodes For Increased Power Production In Air-Cathode Microbial Fuel Cells

An Innovative Miniature Microbial Fuel Cell Fabricated Using Photolithography.