Abstract:This study presents a novel method for independently calculating organic matter (OM) removal and electricity generation in a microbial fuel cell (MFC) treating sewage. This methodology used OM concentration as the exclusive variable for input, facilitating the prediction of electricity generation with variable Coulombic efficiency. The employed MFC, of tubular design, incorporates an air core surrounded by a carbon-based cathode, an anion exchange membrane , nonwoven graphite fabric, and encircled by twelve carbon brush anodes. This setup successfully reduced chemical oxygen demand (COD) from 180 to 50 mg L −1 and biological oxygen demand (BOD) from 84 to 15 mg L −1 within a 35 h hydraulic retention time (HRT). The resulting effluent BOD satisfies Japanese wastewater treatment standards. In the early HRT phase, the MFC exhibited rapid OM reduction, followed by a stabilization of OM concentration. Despite varying HRTs and the sustained OM levels at prolonged HRTs, the MFC consistently generated 0.29 ± 0.14 A m −2 . This apparent contradiction prompted the consideration of additional OM sources from the anode biomass ( C b ). Calculating electricity production based on OM concentration rather than OM degradation was achieved by assessing anode resistance ( R A n ) across different levels of OM supplementation, employing the Butler–Volmer equation. This approach, incorporating considerations for C b and R A n , accurately reproduced MFC performance. It was observed that OM supplementation from C b constituted 50% at 11 h HRT and escalated to 90% at 27 h HRT. Further analysis, including 16S rRNA gene-based microbial community profiling, indicated that higher cathode resistance ( R Cat ) at 1.0 Ω m 2 , compared to a minimum R A n of 0.10 Ω m 2 , favored methanogenesis over electrogenesis on the carbon brushes. This finding underscores the importance of reducing R Cat and minimizing electrode distance, coupled with enhancing the specific surface area of both electrodes, as crucial factors for the advancement of MFC technology.

A Graphite-Granule Membrane-Less Tubular Air-Cathode Microbial Fuel Cell for Power Generation under Continuously Operational Conditions

Tubular Membrane Cathodes for Scalable Power Generation in Microbial Fuel Cells.

Intermittent Contact of Fluidized Anode Particles Containing Exoelectrogenic Biofilms for Continuous Power Generation in Microbial Fuel Cells

Continuous Flowing Membraneless Microbial Fuel Cells with Separated Electrode Chambers

Electricity Generation from Organic Wastewater Using a Continuous-Flow Single Chamber Microbial Fuel Cell

Increased Power Generation in a Continuous Flow MFC with Advective Flow Through the Porous Anode and Reduced Electrode Spacing

Characteristic in electricity-generation and wastewater-treatment by the two-cylinder microbial fuel cells

Electricity generation in a membrane-less microbial fuel cell with down-flow feeding onto the cathode

Modification of carbon based cathode electrode in a batch-type microbial fuel cells

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Microbial fuel cells with an integrated spacer and separate anode and cathode modules

Simultaneous Anaerobic Sulfide and Nitrate Removal Coupled with Electricity Generation in Microbial Fuel Cell

Scalable air cathode microbial fuel cells using glass fiber separators, plastic mesh supporters, and graphite fiber brush anodes.

Performance of a Dual-Chamber Microbial Fuel Cell Inoculated with Active Soil Microbes for Bioelectricity Generation

Anode biomass rather than soluble organic matter is fuel for electricity production in microbial fuel cell at longer hydraulic retention time

Power Generation by Packed-Bed Air-Cathode Microbial Fuel Cells

High-Power Microbial Fuel Cells Based on a Carbon-Carbon Composite Air Cathode.

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

Ion Exchange Membrane Cathodes For Scalable Microbial Fuel Cells

Assessing the Performance of Continuous-Flow Microbial Fuel Cells and Membrane Electrode Assembly with Electrodeposited Mn Oxide Catalyst

Graphite Fiber Brush Anodes For Increased Power Production In Air-Cathode Microbial Fuel Cells