Abstract:A new and simplified approach for making cathodes for microbial fuel cells (MFCs) was developed by using metal mesh current collectors and inexpensive polymer/carbon diffusion layers (DLs). Rather than adding a current collector to a cathode material such as carbon cloth, we constructed the cathode around the metal mesh itself, thereby avoiding the need for the carbon cloth or other supporting material. A base layer of poly(dimethylsiloxane) (PDMS) and carbon black was applied to the air-side of a stainless steel mesh, and Pt on carbon black with Nafion binder was applied to the solution-side as catalyst for oxygen reduction. The PDMS prevented water leakage and functioned as a DL by limiting oxygen transfer through the cathode and improving coulombic efficiency. PDMS is hydrophobic, stable, and less expensive than other DL materials, such as PTFE, that are commonly applied to air cathodes. Multiple PDMS/carbon layers were applied in order to optimize the performance of the cathode. Two PDMS/carbon layers achieved the highest maximum power density of 1610 +/- 56 mW/m(2) (normalized to cathode projected surface area; 47.0 +/- 1.6 W/m(3) based on liquid volume). This power output was comparable to the best result of 1635 +/- 62 mW/m(2) obtained using carbon cloth with three PDMS/carbon layers and a Pt catalyst. The coulombic efficiency of the mesh cathodes reached more than 80%, and was much higher than the maximum of 57% obtained with carbon cloth. These findings demonstrate that cathodes can be constructed around metal mesh materials such as stainless steel, and that an inexpensive coating of PDMS can prevent water leakage and lead to improved coulombic efficiencies.

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Sewage Sludge-Derived Carbon-Doped Manganese As Efficient Cathode Catalysts in Microbial Fuel Cells

Power Generation by Packed-Bed Air-Cathode Microbial Fuel Cells

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

Immobilization of a Metal-Nitrogen-Carbon Catalyst on Activated Carbon with Enhanced Cathode Performance in Microbial Fuel Cells.

Power generation using carbon mesh cathodes with different diffusion layers in microbial fuel cells

Power Generation Using an Activated Carbon Fiber Felt Cathode in an Upflow Microbial Fuel Cell

Long-term performance of activated carbon air cathodes with different diffusion layer porosities in microbial fuel cells

Highly Efficient Improvement of Power Generation and Waste Removal in Microbial Fuel Cell by Associating Activated Carbon with a Novel Porous Iron-Nitrogen-doped Carbon Nanosphere

Use of Carbon Mesh Anodes and the Effect of Different Pretreatment Methods on Power Production in Microbial Fuel Cells.

Use of Pyrolyzed Iron Ethylenediaminetetraacetic Acid Modified Activated Carbon As Air-Cathode Catalyst in Microbial Fuel Cells.

High-Power Microbial Fuel Cells Based on a Carbon-Carbon Composite Air Cathode.

Long‐Term Performance of Chemically and Physically Modified Activated Carbons in Air Cathodes of Microbial Fuel Cells

Simultaneously Enhancing Power Density and Coulombic Efficiency with a Hydrophobic Fe–N4/activated Carbon Air Cathode for Microbial Fuel Cells

Single-Step Fabrication Using A Phase Inversion Method of Poly(Vinylidene Fluoride) (pvdf) Activated Carbon Air Cathodes for Microbial Fuel Cells

Microbial Fuel Cell Cathodes with Poly(dimethylsiloxane) Diffusion Layers Constructed Around Stainless Steel Mesh Current Collectors

High-Performance Carbon Aerogel Air Cathodes for Microbial Fuel Cells.

Enhanced Activated Carbon Cathode Performance for Microbial Fuel Cell by Blending Carbon Black

Carbonization and activation of inexpensive semicoke-packed electrodes to enhance power generation of microbial fuel cells.

Microwave Preparation of Catalyst Layer for Enhancing the Oxygen Reduction of Air Cathode in Microbial Fuel Cells

Cobalt‑nitrogen‑carbon Nanotube Co-Implanted Activated Carbon As Efficient Cathodic Oxygen Reduction Catalyst in Microbial Fuel Cells