Abstract:Air cathodes used in microbial fuel cells (MFCs) need to have high catalytic activity for oxygen reduction, but they must also be easy to manufacture, inexpensive, and watertight. A simple one-step, phase inversion process was used here to construct an inexpensive MFC cathode using a poly(vinylidene fluoride) (PVDF) binder and an activated carbon catalyst. The phase inversion process enabled cathode preparation at room temperatures, without, the need for additional heat treatment, and it produced for the first time a cathode that did not require a separate diffusion layer to prevent water leakage. MFCs using this new type of cathode produced a maximum power density of 1470 +/- 50 mW m(-2) with acetate as a substrate, and 230 +/- 10 mW m(-2) with domestic wastewater. These power densities were similar to those obtained using cathodes made using more expensive materials or more complex procedures, such as cathodes with a polytetrafluoroethylene (PTFE) binder and a poly(dimethylsiloxane) (PDMS) diffusion layer, or a Pt catalyst. Even though the PVDF cathodes did not have a diffusion layer, they withstood up to 1.22 +/- 0.04 m of water head (similar to 12 kPa) without leakage, compared to 0.18 +/- 0.02 m for cathodes made using PTFE binder and PDMS diffusion layer. The cost of PVDF and activated carbon ($3 m(-2)) was less than that of the stainless steel mesh current collector ($12 m(-2)). PVDF-based AC cathodes therefore are inexpensive, have excellent performance in terms of power and water leakage, and they can be easily manufactured using a single phase inversion process at room temperature.

Power Generation Using an Activated Carbon Fiber Felt Cathode in an Upflow Microbial Fuel Cell

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Simultaneously Enhancing Power Density and Coulombic Efficiency with a Hydrophobic Fe–N4/activated Carbon Air Cathode for Microbial Fuel Cells

Power Generation by Packed-Bed Air-Cathode Microbial Fuel Cells

Immobilization of a Metal-Nitrogen-Carbon Catalyst on Activated Carbon with Enhanced Cathode Performance in Microbial Fuel Cells.

Power generation using carbon mesh cathodes with different diffusion layers in microbial fuel cells

Highly Efficient Improvement of Power Generation and Waste Removal in Microbial Fuel Cell by Associating Activated Carbon with a Novel Porous Iron-Nitrogen-doped Carbon Nanosphere

High‐Performance Carbon Anode Derived from Sugarcane for Packed Microbial Fuel Cells

Low-cost Fe–N–C Catalyst Derived from Fe (Iii)-Chitosan Hydrogel to Enhance Power Production in Microbial Fuel Cells

Enhanced Activated Carbon Cathode Performance for Microbial Fuel Cell by Blending Carbon Black

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

Carbon Material Optimized Biocathode for Improving Microbial Fuel Cell Performance

Use of Pyrolyzed Iron Ethylenediaminetetraacetic Acid Modified Activated Carbon As Air-Cathode Catalyst in Microbial Fuel Cells.

Long‐Term Performance of Chemically and Physically Modified Activated Carbons in Air Cathodes of Microbial Fuel Cells

Enhanced electricity generation and storage by nitrogen-doped hierarchically porous carbon modification of the capacitive bioanode in microbial fuel cells

High-Power Microbial Fuel Cells Based on a Carbon-Carbon Composite Air Cathode.

Use of Carbon Mesh Anodes and the Effect of Different Pretreatment Methods on Power Production in Microbial Fuel Cells.

High-Capacitance Manganese Dioxide Oxide/Carbon Nanotube/Carbon Felt as a Bioanode for Enhanced Energy Output in Microbial Fuel Cells

Single-Step Fabrication Using A Phase Inversion Method of Poly(Vinylidene Fluoride) (pvdf) Activated Carbon Air Cathodes for Microbial Fuel Cells

Increased Performance of Single-Chamber Microbial Fuel Cells Using an Improved Cathode Structure

Graphite Fiber Brush Anodes For Increased Power Production In Air-Cathode Microbial Fuel Cells