Abstract:One of the greatest challenges for using microbial fuel cells (MFCs) for wastewater treatment is creating a scalable architecture that provides large surface areas for oxygen reduction at the cathode and bacteria growth on the anode. We demonstrate here a scalable cathode concept by showing that a tubular ultrafiltration membrane with a conductive graphite coating and a nonprecious metal catalyst (CoTMPP) can be used to produce power in an MFC. Using a carbon paper anode (surface area Aan = 7 cm2, surface area per reactor volume Aan,s = 25 m2/m3), an MFC with two 3-cm tube cathodes (Acat = 27 cm2, Acat,s = 84 m2/m3) generated up to 8.8 W/m3 (403 mW/m2) using glucose [0.8 g/L in a 50 mM phosphate buffer solution (PBS)], which was only slightly less than that produced using a carbon paper cathode with a Pt catalyst (9.9 W/m3, 394 mW/m2; Acat= 7 cm2, Acat,s= 25 m2/m3). Coulombic efficiencies (CEs) with carbon paper anodes were 25-40% with tube cathodes (CoTMPP), compared to 7-19% with a carbon paper cathode. When a high-surface-area graphite brush anode was used (Aan = 2235 cm2, Aan,s = 7700 m2/m3) with two tube cathodes placed inside the reactor (Acat = 27 cm2, Acas, = 93 m2/m3), the MFC produced 17.7 W/m3 with a CE = 70-74% (200 mM PBS). Further increases in the surface area of the tube cathodes to 54 cm2 (120 m2/m3) increased the total power output (from 0.51 to 0.83 mW), but the increase in volume resulted in a constant volumetric power density (approximately 18 W/m3). These results demonstrate that an MFC design using tubular cathodes coated with nonprecious metal catalysts, and brush anodes, is a promising architecture that is intrinsically scalable for creating larger systems. Further increases in power output will be possible through the development of cathodes with lower internal resistances.

Power Generation by Packed-Bed Air-Cathode Microbial Fuel Cells

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

Carbonization and activation of inexpensive semicoke-packed electrodes to enhance power generation of microbial fuel cells.

Power generation using carbon mesh cathodes with different diffusion layers in microbial fuel cells

Use of Inexpensive Semicoke and Activated Carbon As Biocathode in Microbial Fuel Cells.

Pressurized Air Cathodes for Enhanced Stability and Power Generation by Microbial Fuel Cells

Tubular Membrane Cathodes for Scalable Power Generation in Microbial Fuel Cells.

High‐Performance Carbon Anode Derived from Sugarcane for Packed Microbial Fuel Cells

Immobilization of a Metal-Nitrogen-Carbon Catalyst on Activated Carbon with Enhanced Cathode Performance in Microbial Fuel Cells.

Oxygen-Reducing Biocathodes Operating With Passive Oxygen Transfer In Microbial Fuel Cells

Electricity Generation And Microbial Community Changes In Microbial Fuel Cells Packed With Different Anodic Materials

Air-cathode structure optimization in separator-coupled microbial fuel cells.

Single-Step Fabrication Using A Phase Inversion Method of Poly(Vinylidene Fluoride) (pvdf) Activated Carbon Air Cathodes for Microbial Fuel Cells

Microbial Fuel Cell Cathodes with Poly(dimethylsiloxane) Diffusion Layers Constructed Around Stainless Steel Mesh Current Collectors

Carbon Material Optimized Biocathode for Improving Microbial Fuel Cell Performance

Long-term performance of activated carbon air cathodes with different diffusion layer porosities in microbial fuel cells

Use of Carbon Mesh Anodes and the Effect of Different Pretreatment Methods on Power Production in Microbial Fuel Cells.

Microbial Community Analysis in Biocathode Microbial Fuel Cells Packed with Different Materials

Ion Exchange Membrane Cathodes For Scalable Microbial Fuel Cells

Power Generation Using an Activated Carbon Fiber Felt Cathode in an Upflow Microbial Fuel Cell