Abstract:Activated carbon (AC) is a useful and environmentally sustainable catalyst for oxygen reduction in air-cathode microbial fuel cells (MFCs), but there is great interest in improving its performance and longevity. To enhance the performance of AC cathodes, carbon black (CB) was added into AC at CB:AC ratios of 0, 2, 5, 10, and 15 wt % to increase electrical conductivity and facilitate electron transfer. AC cathodes were then evaluated in both MFCs and electrochemical cells and compared to reactors with cathodes made with Pt. Maximum power densities of MFCs were increased by 9-16% with CB compared to the plain AC in the first week. The optimal CB:AC ratio was 10% based on both MFC polarization tests and three electrode electrochemical tests. The maximum power density of the 10% CB cathode was initially 1560 ± 40 mW/m(2) and decreased by only 7% after 5 months of operation compared to a 61% decrease for the control (Pt catalyst, 570 ± 30 mW/m(2) after 5 months). The catalytic activities of Pt and AC (plain or with 10% CB) were further examined in rotating disk electrode (RDE) tests that minimized mass transfer limitations. The RDE tests showed that the limiting current of the AC with 10% CB was improved by up to 21% primarily due to a decrease in charge transfer resistance (25%). These results show that blending CB in AC is a simple and effective strategy to enhance AC cathode performance in MFCs and that further improvement in performance could be obtained by reducing mass transfer limitations.

Simultaneously Enhancing Power Density and Coulombic Efficiency with a Hydrophobic Fe–N4/activated Carbon Air Cathode for Microbial Fuel Cells

Immobilization of a Metal-Nitrogen-Carbon Catalyst on Activated Carbon with Enhanced Cathode Performance in Microbial Fuel Cells.

High-Power Microbial Fuel Cells Based on a Carbon-Carbon Composite Air Cathode.

High-Performance Carbon Aerogel Air Cathodes for Microbial Fuel Cells.

Low-cost Fe–N–C Catalyst Derived from Fe (Iii)-Chitosan Hydrogel to Enhance Power Production in Microbial Fuel Cells

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Highly Efficient Improvement of Power Generation and Waste Removal in Microbial Fuel Cell by Associating Activated Carbon with a Novel Porous Iron-Nitrogen-doped Carbon Nanosphere

Enhanced electricity generation and storage by nitrogen-doped hierarchically porous carbon modification of the capacitive bioanode in microbial fuel cells

Enhanced Activated Carbon Cathode Performance for Microbial Fuel Cell by Blending Carbon Black

High-Capacitance Manganese Dioxide Oxide/Carbon Nanotube/Carbon Felt as a Bioanode for Enhanced Energy Output in Microbial Fuel Cells

Nano-Fe3O4 Coated on Carbon Monolith for Anode Enhancement in Microbial Fuel Cells

Improving power output in microbial fuel cells with free-standing CoC x /Co@CC composite anodes

Power Generation Using an Activated Carbon Fiber Felt Cathode in an Upflow Microbial Fuel Cell

Nano-Fe3C@2D-NC@CC as anode for improving extracellular electron transfer and electricity generation of microbial fuel cells

Nitrogenous mesoporous carbon coated with Co/Cu nanoparticles modified activated carbon as air cathode catalyst for microbial fuel cell

Carbon nanofiber/graphene hybrids anchoring Fe, N, S heteroatoms simultaneously enhancing extracellular electron transfer and biofilm adhesion in microbial fuel cells

Bimetal-organic framework-derived porous CoFe2O4 nanoparticles as biocompatible anode electrocatalysts for improving the power generation of microbial fuel cells

Bio-electrocatalyst Fe3O4/Fe@C derived from MOF as a high-performance bioanode in single-chamber microbial fuel cell

Enhanced oxygen reduction upon Ag/Fe co-doped UiO-66-NH2-derived porous carbon as bacteriostatic catalysts in microbial fuel cells

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

Activated carbon supported Fe-Cu -NC as efficient cathode catalyst for the microbial fuel cell