Abstract:Single chambered air-cathode microbial fuel cells (MFCs) are promising to be scaled up as sustainable wastewater treatment systems. However, the current air-cathode made by brushing noble metal catalyst and Nafion binder onto carbon matrix becomes one of the biggest bottlenecks for the further development of MFCs due to its high cost, huge labor-consuming and less accuracy. A novel structure of air-cathode was constructed here by rolling activated carbon (AC) and polytetrafluoroethylene (PTFE) as catalyst layer to enhance the reproducibility and improve the performance by an optimized three-phase interface (TPI). Air-cathodes with AC/PTFE ratios of 3, 5, 6, 8 and 11 in the catalyst layer were prepared, and the physical and electrochemical techniques were employed to investigate their surface microstructure and electrochemical characteristics. Uniform cross-linked ropiness networks were observed from the catalyst layer of all the cathodes and increased as the AC/PTFE ratio decreased, while the exchange currents were positively related to this ratio. Maximum power densities (MPDs) decreased as follows: AC/PTFE = 6 (802 mW m(-2) at 3.4 A m(-2)), 5 (704 mW m(-2) at 2.2 mA m(-2)), 8 (647 mW m(-2) at 2.2 A m(-2)), 3 (597 mw m(-2) at 2.1 A m(-2)) and 11 (584 mW m(-2) at 2.0 mA m(-2)), which was due to the changes of both the capacitance characteristics and conductivities according to the electrochemical impedance spectrum (EIS) analysis. This study demonstrated that inexpensive, highly reproducible, high performance and scalable air-cathode can be produced by rolling method without using noble metal and expensive binder. (C) 2012 Elsevier Ltd. All rights reserved.

Microwave Preparation of Catalyst Layer for Enhancing the Oxygen Reduction of Air Cathode in Microbial Fuel Cells

Enhanced Performance of Activated Carbon–polytetrafluoroethylene Air-Cathode by Avoidance of Sintering on Catalyst Layer in Microbial Fuel Cells

Catalysis Kinetics And Porous Analysis Of Rolling Activated Carbon-Ptfe Air-Cathode In Microbial Fuel Cells

Enhanced Activated Carbon Cathode Performance for Microbial Fuel Cell by Blending Carbon Black

Use of Pyrolyzed Iron Ethylenediaminetetraacetic Acid Modified Activated Carbon As Air-Cathode Catalyst in Microbial Fuel Cells.

A Novel Structure of Scalable Air-Cathode Without Nafion and Pt by Rolling Activated Carbon and PTFE As Catalyst Layer in Microbial Fuel Cells.

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

Temperature-Depended Cu0.92co2.08o4 Modified Activated Carbon Air Cathode Improves Power Output in Microbial Fuel Cell

Microwave-assisted synthesis of nitrogen-doped activated carbon as an oxygen reduction catalyst in microbial fuel cells

The Influence and Mechanism of Different Acid Treatment to Activated Carbon Used As Air-Breathing Cathode Catalyst of Microbial Fuel Cell

The performance and mechanism of modified activated carbon air cathode by non-stoichiometric nano Fe3O4 in the microbial fuel cell

Long‐Term Performance of Chemically and Physically Modified Activated Carbons in Air Cathodes of Microbial Fuel Cells

The Performance of Activated Carbon Treated with H3PO4 at 80°C in the Air-Cathode Microbial Fuel Cell

Immobilization of a Metal-Nitrogen-Carbon Catalyst on Activated Carbon with Enhanced Cathode Performance in Microbial Fuel Cells.

Long-term performance of activated carbon air cathodes with different diffusion layer porosities in microbial fuel cells

High-efficiency Power Amplification of Microbial Fuel Cell by Modifying Cathode with Iron-Incorporated Thermalized Covalent Organic Framework

Improved performance of microbial fuel cells using a gradient porous air cathode: An experiment and simulation study.

Highly Efficient Improvement of Power Generation and Waste Removal in Microbial Fuel Cell by Associating Activated Carbon with a Novel Porous Iron-Nitrogen-doped Carbon Nanosphere

N-Type Cu2o Doped Activated Carbon As Catalyst for Improving Power Generation of Air Cathode Microbial Fuel Cells

Enhancing Catalyst Efficiency of Activated Carbon for Oxygen Reduction Reaction in Air Cathode Microbial Fuel Cell Application