Abstract:High cost and limited natural reserves of precious metals as oxygen reduction reduction (ORR) catalysts have hindered the practical application of microbial fuel cells (MFCs). Herein, the cost-effective catalysts were synthesized by co-doping binuclear-cobalt-phthalocyanine (Bi-CoPc) and cerium oxide (CeO2) on ordered mesoporous carbon (OMC). The catalysts Bi-CoPc/x%CeO2/OMC (x = 3, 6 and 12) with different CeO2 loading were physically characterized by Nitrogen physisorption, X-ray Diffraction, Transmission Electron Microscopy and X-ray Photoelectron Spectroscopy, and chemically characterized by Rotary Disk Electrode analysis. The relationship between the CeO2 content and ORR activity was investigated. The optimum CeO2 loading in the Bi-CoPc/6%CeO2/OMC catalyst provided the highest Ce3+ content that are favorable for the chemisorbed oxygen. Bi-CoPc/6%CeO2/OMC led to an increased half wave potential and limiting current density and to the further decreased over-potential. It also displayed a higher electron transfer number in comparison with Bi-CoPc/3%CeO2/OMC and Bi-CoPc/12%CeO2/OMC. The electrochemical results were closely related with the voltage generation obtained in single chamber MFC (SCMFCs) with air cathode. Bi-CoPc/6%CeO2/OMC-based SCMFC generated the highest power density of 486 ± 6 mW/m2 and achieved chemical oxygen demand removal of 79.3 ± 1.5%. The voltage generation for Bi-CoPc/6%CeO2/OMC decreased only by 3.7% after 1300 h of operation, indicating its good stability in MFCs large scale application.

Microbial Fuel Cell Performance with Non-Pt Cathode Catalysts

Sewage Sludge-Derived Carbon-Doped Manganese As Efficient Cathode Catalysts in Microbial Fuel Cells

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

Activity and stability of pyrolyzed iron ethylenediaminetetraacetic acid as cathode catalyst in microbial fuel cells.

Immobilization of a Metal-Nitrogen-Carbon Catalyst on Activated Carbon with Enhanced Cathode Performance in Microbial Fuel Cells.

Effects of different Pt-M (M = Fe, Co, Ni) alloy as cathodic catalyst on the performance of two-chambered microbial fuel cells

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Use of Pyrolyzed Iron Ethylenediaminetetraacetic Acid Modified Activated Carbon As Air-Cathode Catalyst in Microbial Fuel Cells.

Activated carbon supported Fe-Cu -NC as efficient cathode catalyst for the microbial fuel cell

Synthesis of Iron and Phosphorous‐Embedded Nitrogen‐Containing Porous Carbon as an Efficient Electrocatalyst for Microbial Fuel Cells

Bimetal-organic framework-derived porous CoFe2O4 nanoparticles as biocompatible anode electrocatalysts for improving the power generation of microbial fuel cells

Design and Optimization of Critical-Raw-Material-Free Electrodes towards the Performance Enhancement of Microbial Fuel Cells

Enhanced oxygen reduction upon Ag/Fe co-doped UiO-66-NH2-derived porous carbon as bacteriostatic catalysts in microbial fuel cells

Enhancement of Electricity Generation in Single Chamber Microbial Fuel Cell Using Binuclear-Cobalt-Phthalocyanine and Cerium Oxide Co-Supported on Ordered Mesoporous Carbon as Cathode Catalyst

Polyelectrolyte-single Wall Carbon Nanotube Composite As an Effective Cathode Catalyst for Air-Cathode Microbial Fuel Cells.

Bio-electrocatalyst Fe3O4/Fe@C derived from MOF as a high-performance bioanode in single-chamber microbial fuel cell

Bimetallic hybrids modified with carbon nanotubes as cathode catalysts for microbial fuel cell: Effective oxygen reduction catalysis and inhibition of biofilm formation

High-Performance Carbon Aerogel Air Cathodes for Microbial Fuel Cells.

Power Generation by Packed-Bed Air-Cathode Microbial Fuel Cells

Assessing the Performance of Continuous-Flow Microbial Fuel Cells and Membrane Electrode Assembly with Electrodeposited Mn Oxide Catalyst

High power density output and durability of microbial fuel cell enabled by dispersed cobalt nanoparticles on nitrogen-doped carbon as cathode electrocatalyst