Abstract:The inherent disadvantages of carbon-based anodes, including their low hydrophilicity, significant charge transfer resistance, and limited power density, hinder their widespread commercial utilization in microbial fuel cells (MFC). Addressing these challenges, this study involved the surface modification of a carbon-based anode. To improve the adhesion of electroactive microorganisms (EAM) on the anode surface and increase the extracellular electron transfer rate, CNT@Ti 3 C 2 T x MXene was applied to the surface of carbon cloth (CC) using drip coating. Initially, we conducted a comprehensive investigation on the optimal amount of modification required. To achieve this, we designed four distinct groups of modified electrodes. Through electrochemical analysis and phase characterization, it was determined that a modification dosage of 1.5 mg/cm 2 for CNT@Ti 3 C 2 T x MXene/CC electrodes yielded the most optimal electrical conductivity and the highest capacitance. The Rs of CC is reduced from 1.48 to 0.55 Ω and the Rct from 2.62 to 2.09 Ω, and the capacitance is increased from 3.98 10 −07 F to 9.11 10 −06 F . Subsequently, the CNT@Ti 3 C 2 T x MXene/CC with a modification of 1.5 mg/cm 2 was used as the anode of the microbial fuel cell. The modification of CNT@Ti 3 C 2 T x MXene improved the power generation performance. The maximum output voltage of the MFC was increased from 546 to 709 mv, and the power density was increased from 44.9 to 101.8 mW/m 2 . The underlying factor lies in the ability of CNT@Ti 3 C 2 T x MXene/CC to significantly lower the internal resistance within the microbial fuel cell, thereby fostering the development of biofilm. Notably, our observations revealed that the biofilm formation was particularly facilitated on the anode surface of CNT@Ti 3 C 2 T x MXene/CC. In essence, the CNT@Ti 3 C 2 T x MXene-modified carbon cloth not only minimizes internal resistance but also enhances the electroactive surface area, exhibiting superior electrical conductivity. These attributes make it an advantageous material for biological applications.

Effects of different Pt-M (M = Fe, Co, Ni) alloy as cathodic catalyst on the performance of two-chambered microbial fuel cells

Comparison of C, Pt/C, Pd/C as cathodic oxygen reduction catalysts in microbial fuel cells

Efficient electrocatalysis of cathodic oxygen reduction with Pt–Fe alloy catalyst in microbial fuel cell

Effect of cathode electron acceptors on simultaneous anaerobic sulfide and nitrate removal in microbial fuel cell

Microbial Fuel Cell Performance with Non-Pt Cathode Catalysts

Synthesis and study of CuNiTiO3 as an ORR electrocatalyst to enhance microbial fuel cell efficiency

A co-doped oxygen reduction catalyst with FeCu promotes the stability of microbial fuel cells

Investigating the effect of anode materials on the performance and microbial community in an integrated chamber-free microbial fuel cell

An Excellent Alternative Composite Modifier for Cathode Catalysts Prepared from Bacterial Cellulose Doped with Cu and P and Its Utilization in Microbial Fuel Cell.

Enhanced oxygen reduction upon Ag/Fe co-doped UiO-66-NH2-derived porous carbon as bacteriostatic catalysts in microbial fuel cells

Deposition of Fe on Graphite Felt by Thermal Decomposition of Fe(Co)(5) for Effective Cathodic Preparation of Microbial Fuel Cells

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

Bimetallic oxide MnFe2O4 modified carbon felt anode by drip coating: an effective approach enhancing power generation performance of microbial fuel cell

Metallic State Fes Anchored (Fe)/fe3o4/n-Doped Graphitic Carbon with Porous Spongelike Structure As Durable Catalysts for Enhancing Bioelectricity Generation

Activated carbon supported Fe-Cu -NC as efficient cathode catalyst for the microbial fuel cell

Bimetallic hybrids modified with carbon nanotubes as cathode catalysts for microbial fuel cell: Effective oxygen reduction catalysis and inhibition of biofilm formation

ZIF-8-derived Cu, N Co-Doped Carbon As a Bifunctional Cathode Catalyst for Enhanced Performance of Microbial Fuel Cell.

Fe3C-modified porous carbon as anode electrocatalyst for improving extracellular electron transfer and removing Cr(VI) in microbial fuel cells

CNT@Ti3C2TxMXene Nanocomposite Catalysts as Anodes to Improve the Electricity Production Performance of Microbial Fuel Cells

The Use of Double-Sided Cloth Without Diffusion Layers As Air-Cathode in Microbial Fuel Cells

Cu-doped CaFeO3 perovskite oxide as oxygen reduction catalyst in air cathode microbial fuel cells