Abstract:Background: Porous carbon materials are promising candidate supports for various applications. In a number of these applications, doping of the carbon framework with heteroatoms provides a facile route to readily tune the carbon properties. The oxygen reduction reaction (ORR), where the reaction can be catalyzed without precious metals is one of the common applications for the heteroatom-doped carbons. Therefore, heteroatom doped catalysts might have a promising potential as a cathode in Microbial fuel cells (MFCs). MFCs have a good potential to produce electricity from biological oxidization of wastes at the anode and chemical reduction at the cathode. To the best of our knowledge, no studies have been yet reported on utilizing Sulfur trioxide pyridine (STP) and CMK-3 for the preparation of (N and S) doped ordered porous carbon materials. The presence of highly ordered mesostructured and the synergistic effect of N and S atoms with specific structures enhance the oxygen adsorption due to improving the electrocatalytic activity. So the optimal catalyst, with significant stability and excellent tolerance of methanol crossover can be a promising candidate for even other storage and conversion devices. Methods: The physico-chemical properties of the prepared samples were determined by Small Angle X-ray Diffraction (SAXRD), N2 sorption-desorption, Transmission Electron Microscopy (TEM), Field Emission Scanning Electron Microscopy (FESEM) and X-ray Photoelectron Spectroscopy (XPS). The prepared samples were further applied for oxygen reduction reaction (ORR) and the optimal cathode was tested with the Microbial Fuel Cell (MFC) system. Furthermore, according to structural analysis, The HRTEM, and SAXRD results confirmed the formation of well-ordered hexagonal (p6mm) arrays of mesopores in the direction of (100). The EDS and XPS approved that N and S were successfully doped into the CMK-3 carbon framework. Results: Among all the studied CMK-3 based catalysts, the catalyst prepared by STP precursor and pyrolysis at 900°C exhibited the highest ORR activity with the onset potential of 1.02 V vs. RHE and 4 electron transfer number per oxygen molecule in 0.1 M KOH. The high catalyst durability and fuel-crossover tolerance led to stable performance of the optimal cathode after 5000 s operation, while the Pt/C cathode-based was considerably degraded. Finally, the MFC system with the optimal cathode displayed 43.9 mW·m-2 peak power density showing even reasonable performance in comparison to a Pt/C 20 wt.%.cathode. Conclusions: The results revealed that the synergistic effect of nitrogen and sulfur co-doped on the carbon substrate structure leads to improvement in catalytic activity. Also, it was clearly observed that the porous structure and order level of the carbon substrate could considerably change the ORR performance.

The Role of Micropore and Mesoporous in Activated Carbon As Air-Cathode Catalyst in Microbial Fuel Cell for Oxygen Reduction Reaction

Long-term performance of activated carbon air cathodes with different diffusion layer porosities in microbial fuel cells

Synthesizing Nitrogen-Doped Activated Carbon and Probing Its Active Sites for Oxygen Reduction Reaction in Microbial Fuel Cells

Enhancing Catalyst Efficiency of Activated Carbon for Oxygen Reduction Reaction in Air Cathode Microbial Fuel Cell Application

Ordered mesoporous carbon with atomically dispersed Fe-Nx as oxygen reduction reaction electrocatalyst in air-cathode microbial fuel cells

Microwave Preparation of Catalyst Layer for Enhancing the Oxygen Reduction of Air Cathode in Microbial Fuel Cells

Cobalt‑nitrogen‑carbon Nanotube Co-Implanted Activated Carbon As Efficient Cathodic Oxygen Reduction Catalyst in Microbial Fuel Cells

Microwave-assisted synthesis of nitrogen-doped activated carbon as an oxygen reduction catalyst in microbial fuel cells

Highly Efficient Improvement of Power Generation and Waste Removal in Microbial Fuel Cell by Associating Activated Carbon with a Novel Porous Iron-Nitrogen-doped Carbon Nanosphere

Templating synthesis of hierarchically meso/macroporous N-doped microalgae derived biocarbon as oxygen reduction reaction catalyst for microbial fuel cells

N and S Co-doped Ordered Mesoporous Carbon: An Efficient Electrocatalyst for Oxygen Reduction Reaction in Microbial Fuel Cells

Long‐Term Performance of Chemically and Physically Modified Activated Carbons in Air Cathodes of Microbial Fuel Cells

Use of Pyrolyzed Iron Ethylenediaminetetraacetic Acid Modified Activated Carbon As Air-Cathode Catalyst in Microbial Fuel Cells.

Fe/N codoped porous graphitic carbon derived from macadamia shells as an efficient cathode oxygen reduction catalyst in microbial fuel cells

Comparison of C, Pt/C, Pd/C as cathodic oxygen reduction catalysts in microbial fuel cells

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Nitrogen and Phosphorus Doped Activated Carbon Catalyst Prepared from Shrimp Shell and its Application in MFC Air Cathode

Nitrogen and phosphorus co-doped carbon modified activated carbon as an efficient oxygen reduction catalyst for microbial fuel cells

Nitrogenous mesoporous carbon coated with Co/Cu nanoparticles modified activated carbon as air cathode catalyst for microbial fuel cell

Oxygen Reduction Reaction Activity and the Microbial Community in Response to Magnetite Coordinating Nitrogen-Doped Carbon Catalysts in Bioelectrochemical Systems.

Activated carbon supported Fe-Cu -NC as efficient cathode catalyst for the microbial fuel cell