Abstract:One of the greatest challenges for using microbial fuel cells (MFCs) for wastewater treatment is creating a scalable architecture that provides large surface areas for oxygen reduction at the cathode and bacteria growth on the anode. We demonstrate here a scalable cathode concept by showing that a tubular ultrafiltration membrane with a conductive graphite coating and a nonprecious metal catalyst (CoTMPP) can be used to produce power in an MFC. Using a carbon paper anode (surface area Aan = 7 cm2, surface area per reactor volume Aan,s = 25 m2/m3), an MFC with two 3-cm tube cathodes (Acat = 27 cm2, Acat,s = 84 m2/m3) generated up to 8.8 W/m3 (403 mW/m2) using glucose [0.8 g/L in a 50 mM phosphate buffer solution (PBS)], which was only slightly less than that produced using a carbon paper cathode with a Pt catalyst (9.9 W/m3, 394 mW/m2; Acat= 7 cm2, Acat,s= 25 m2/m3). Coulombic efficiencies (CEs) with carbon paper anodes were 25-40% with tube cathodes (CoTMPP), compared to 7-19% with a carbon paper cathode. When a high-surface-area graphite brush anode was used (Aan = 2235 cm2, Aan,s = 7700 m2/m3) with two tube cathodes placed inside the reactor (Acat = 27 cm2, Acas, = 93 m2/m3), the MFC produced 17.7 W/m3 with a CE = 70-74% (200 mM PBS). Further increases in the surface area of the tube cathodes to 54 cm2 (120 m2/m3) increased the total power output (from 0.51 to 0.83 mW), but the increase in volume resulted in a constant volumetric power density (approximately 18 W/m3). These results demonstrate that an MFC design using tubular cathodes coated with nonprecious metal catalysts, and brush anodes, is a promising architecture that is intrinsically scalable for creating larger systems. Further increases in power output will be possible through the development of cathodes with lower internal resistances.

Scale-up of Membrane-Free Single-Chamber Microbial Fuel Cells

Scale-up and stack performance of single-chamber microbial fuel cells with activated carbon air cathodes

Increasing Power Generation for Scaling Up Single-Chamber Air Cathode Microbial Fuel Cells.

Performance Assessment of Multi-Electrodes Reactors for Scaling-up Microbial Fuel Cells

Microbial fuel cells with an integrated spacer and separate anode and cathode modules

Tubular Membrane Cathodes for Scalable Power Generation in Microbial Fuel Cells.

Increased Power Generation in a Continuous Flow MFC with Advective Flow Through the Porous Anode and Reduced Electrode Spacing

Scaling up self-stratifying supercapacitive microbial fuel cell

Scalable air cathode microbial fuel cells using glass fiber separators, plastic mesh supporters, and graphite fiber brush anodes.

Power generation in fed-batch microbial fuel cells as a function of ionic strength, temperature, and reactor configuration.

Scaling Up a Novel Denitrifying Microbial Fuel Cell with an Oxic-Anoxic Two Stage Biocathode

Evaluating a Multi-Panel Air Cathode Through Electrochemical and Biotic Tests

Ion Exchange Membrane Cathodes For Scalable Microbial Fuel Cells

Continuous Flowing Membraneless Microbial Fuel Cells with Separated Electrode Chambers

Performance of Two Different Types of Anodes in Membrane Electrode Assembly Microbial Fuel Cells for Power Generation from Domestic Wastewater

Microbial Fuel Cell Technology—A Critical Review on Scale-Up Issues

A high performance membraneless microfluidic microbial fuel cell for stable, long-term benchtop operation under strong flow

Parameters affecting the performance of anaerobic baffled stacking microbial fuel cell

A miniaturized microbial fuel cell with three-dimensional graphene macroporous scaffold anode demonstrating a record power density of over 10 000 W m(-3) .

A new strategy for improving MFC power output by shared electrode MFC–MEC coupling

New architecture for modulization of membraneless and single-chambered microbial fuel cell using a bipolar plate-electrode assembly (BEA)