Abstract:Abstract This paper presents a small-size on-chip capacitively coupled digital isolator with superior Common Mode Transient Immunity (CMTI) and high operational speed performances. It employs a gate-cross-coupled common gate pre-amplifier with an active zero load and a high-pass filter before the pre-amplifier. By applying the proposed technique, the high-frequency gain retains to high value, while the low-frequency gain is greatly attenuated. The high-pass filter, which is designed based on the technology structure of the on-chip isolation capacitance, is applied to further cancel the influence of Common Mode Transient (CMT) and aid in the transmission of high-frequency signal. Furthermore, differential On-Off Keying (OOK) modulation is adopted to eliminate CMT noise. For the purpose of increasing the operation speed performances, the work utilizes the Voltage-Current high-speed comparator with fast feed-forward path as Schmitt trigger and level shift, and employs the envelop-comparator, integrator and filter as demodulator. Thus, it significantly reduces the propagation delay and speeds up the data rate. As a result, both high CMTI and operational speed performances are achieved simultaneously. Fabricated in a 0.18 µm isolated CMOS technology, the area of the isolation element, i.e., the capacitor is 2×104 µm2. The measurement results of a test chip are an over 162 kV/µs CMTI, a 230 Mbps data rate, a 6 ns propagation delay, a 1.5 mA dynamic current and 14 kV isolation breakdown voltage. The characteristics are superior to those of conventional digital isolators.

A Wideband Switched-Capacitor Circulator Based on Isolation Improvement Technique with Transformers

A Capacitively Coupled Digital Isolator with CMTI of 162 kV/μs and Data Rate of 230 Mbps

A Capacitively Coupled Digital Isolator Using Multiple-Pulse-coding Architecture with CMTI of 200kv/μs and Static Current of 60Μa.

A Capacitively Coupled Digital Isolator Using Multiple-pulse-coding Architecture with CMTI of 200 Kv/μs and Static Current of 60 Μa

A capacitively coupled digital isolator with CMTI of 160 kV/μs and data rate of 230 Mbps

A Synchronous Rectified Flyback AC-DC Converter Using Capacitor-Coupled Isolated Communication

A High-Efficiency Active Clamped Flyback AC-DC Converter Using an Integrated Digital Isolator in Isolated Communication

A Fully Integrated, Low-Cost, High Channel Utilization Digital Isolator in Standard CMOS with 50mbps and 100kv/μs CMTI

A Symmetrical Resonant Converter and PCB Transformer Structure for Common Mode Noise Reduction

Design of Millimeter-Wave Transformer Balun with Isolation Circuit in Silicon Based Technology

A Highly-integrated Non-magnetic Passive Circulator Based on Rotary Traveling-wave Oscillator and Spatio-temporal Conductivity Modulation in 130 Nm CMOS

Integrated Active Quasi-Circulator with 27 Db Isolation and 0.8–6.8ghz Wideband by Using Feedback Technique

A Wideband Active Quasi-Circulator with 34-Db Isolation and Insertion Loss of 2.5 Db

A High Power Density 48V-12V DCX with 3-D PCB Winding Transformer

Design of CMOS Integrated Circulator Based on Sequentially Switched Delay Lines with Body-Floating and Clock Boosting Techniques

Interleaved Totem-Pole ZVS Converter Operating in CCM for Single-Stage Bidirectional AC–DC Conversion With High-Frequency Isolation

Compact Quadruple-Mode FSIW Filtering Power Divider With High Isolation Using Embedded Capacitive Isolation Network

Magnet-Free Miniaturized Circulator Based on Non-Reciprocal Network

Quasi-planar High-Isolation Four-Way Power Divider Based on Capacitance Compensation Technology

A Compact Quasi -Circulator with High Isolation Using Reconfigurable 180° Hybrid

Isolated ZVT boost converter with switched capacitors and coupled inductors