Abstract:Conventional circulators are made of magnetic ferrites and suffer from a cumbersome architecture, incompatibility with integrated circuit technology and inability for high frequency applications. To overcome these limitations, here we propose a lightweight low-profile non-magnetic circulator comprising a nonreciprocal time-varying phase shifter. This circulator is composing a nonreciprocal temporal phase shifter and two reciprocal delay-line-based phase shifters. The proposed nonreciprocal temporal phase shifter is based on the generation of time-harmonic signals, enforcing destructive interference for undesired time harmonics and constructive interference for desired time harmonics at different locations of the structure. Such a unique task is accomplished through two phase-engineered temporal loops. The phase and frequency of these two loops are governed by external signals with different phases, imparting an effective electronic angular momentum to the system. We observe large isolation level of greater than 32 dB, a P1dB of +31.7 dBm and IIP3 of +42.4 dBm. Furthermore, this circulator is endowed with a reconfigurable architecture and can be directly embedded in a conventional integrated circuit (IC) technology to realize a class of high power handling and linear IC circulators.

Design of CMOS Integrated Circulator Based on Sequentially Switched Delay Lines with Body-Floating and Clock Boosting Techniques

A Highly-integrated Non-magnetic Passive Circulator Based on Rotary Traveling-wave Oscillator and Spatio-temporal Conductivity Modulation in 130 Nm CMOS

An Active Circulator-Based Delay Line

Broadband Linearity Enhancement Method for a 1.3 GHz-2.5 GHz Digitally-Assisted Oscillator in a 55-Nm CMOS Technology

A Six-Port Circulator Based on Multimode Interference

A K-Band CMOS Standing Wave Oscillator Using Digital-Controlled Artificial Dielectric Differential Transmission Lines

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

Integrated Active Quasi-Circulator with 27 Db Isolation and 0.8–6.8ghz Wideband by Using Feedback Technique

A Dual Interference-Canceling Active Quasi-Circulator Achieving 36-Db Isolation over 6-Ghz Bandwidth

Ultra-Wide Band On-Chip Circulator with Sequentially Switched Delay Lines (SSDL)

Magnet-Free Miniaturized Circulator Based on Non-Reciprocal Network

Highly Linear Nonmagnetic Circulator Enabled By A Temporal Nonreciprocal Phase Shifter

A Wideband Switched-Capacitor Circulator Based on Isolation Improvement Technique with Transformers

Design and Fabrication of Self-biased Microstrip Double-Y Junction Circulator

High-Isolation CMOS T/R Switch Design Using a Two-Stage Equivalent Transmission Line Structure

A CMOS SPDT RF Switch with 68 Db Isolation and 1.0 Db Loss Feathering Switched Resonance Network for MIMO Applications

Folded Circulator with Shorted Y‐junction for High Power Applications

A Wideband Active Quasi-Circulator with 34-Db Isolation and Insertion Loss of 2.5 Db

A Compact X-band Circulator with Embedded Feed Line Based on Substrate Integrated Waveguide

A LOW POWER, HIGH-LINEARITY CMOS DOWNCONVERSION FOLDED MIXER FOR 2.4GHz ISM BAND APPLICATIONS

Ferrite Coupled-Line Circulator with Reduced Length