Abstract:Abstract This paper presents a small-size on-chip capacitively coupled digital isolator with superior Common Mode Transient Immunity (CMTI) and high operational speed performances. It employs a gate-cross-coupled common gate pre-amplifier with an active zero load and a high-pass filter before the pre-amplifier. By applying the proposed technique, the high-frequency gain retains to high value, while the low-frequency gain is greatly attenuated. The high-pass filter, which is designed based on the technology structure of the on-chip isolation capacitance, is applied to further cancel the influence of Common Mode Transient (CMT) and aid in the transmission of high-frequency signal. Furthermore, differential On-Off Keying (OOK) modulation is adopted to eliminate CMT noise. For the purpose of increasing the operation speed performances, the work utilizes the Voltage-Current high-speed comparator with fast feed-forward path as Schmitt trigger and level shift, and employs the envelop-comparator, integrator and filter as demodulator. Thus, it significantly reduces the propagation delay and speeds up the data rate. As a result, both high CMTI and operational speed performances are achieved simultaneously. Fabricated in a 0.18 µm isolated CMOS technology, the area of the isolation element, i.e., the capacitor is 2×104 µm2. The measurement results of a test chip are an over 162 kV/µs CMTI, a 230 Mbps data rate, a 6 ns propagation delay, a 1.5 mA dynamic current and 14 kV isolation breakdown voltage. The characteristics are superior to those of conventional digital isolators.

A capacitively coupled digital isolator with CMTI of 160 kV/μs and data rate of 230 Mbps

A Capacitively Coupled Digital Isolator with CMTI of 162 kV/μs and Data Rate of 230 Mbps

A Capacitively Coupled Digital Isolator Using Multiple-Pulse-coding Architecture with CMTI of 200kv/μs and Static Current of 60Μa.

A Capacitively Coupled Digital Isolator Using Multiple-pulse-coding Architecture with CMTI of 200 Kv/μs and Static Current of 60 Μa

A Capacitively Coupled 3-Channel Digital Isolator with 160 Kv/μs Common Mode Transient Immunity

A Compact 6 ns Propagation Delay 200 Mbps <tex>$100\ \text{kV}/\mu \mathrm{s}$</tex> CMR Capacitively Coupled Direction Configurable 4-Channel Digital Isolator in Standard CMOS

A Compact 6 Ns Propagation Delay 200 Mbps 100 Kv/mu S CMR Capacitively Coupled Direction Configurable 4-Channel Digital Isolator in Standard CMOS

A Fully Integrated, Low-Cost, High Channel Utilization Digital Isolator in Standard CMOS with 50mbps and 100kv/μs CMTI

A 25 Mbps 15 ns Propagation Delay 150 kV/μs CMTI Configurable Dual-Channel Capacitive Digital Isolation Driver

A High-Efficiency Active Clamped Flyback AC-DC Converter Using an Integrated Digital Isolator in Isolated Communication

RF-interconnect for multi-Gb/s digital interface based on 10 GHz RF-modulation in 0.18 /spl mu/m CMOS

25Gbit/s Fully Cmos-Compatible Silicon Modulator Based on Interleaved Pn Junctions

An Investigation on Capacitance-Trigger ESD Protection Devices for High Voltage Integrated Circuits

Highly Efficient Silicon Michelson Interferometer Modulators

Saturated Gain-Induced Non-Reciprocal Transmission and Broadband On-Chip Optical Isolator

Superconducting isolators based on time-modulated coupled-resonator systems

On-chip Ce:YIG/Si Mach-Zehnder Optical Isolator with Low Power Consumption

Integrated Superconducting Isolator-Circulator-Isolator Device

Optimizing performance for on-chip SBS-based isolator

Sub-Volt High-Speed Silicon MOSCAP Microring Modulator Driven by High Mobility Conductive Oxide

On-Chip Broadband, Compact TM Mode Mach–Zehnder Optical Isolator Based on InP-on-Insulator Platforms