Abstract:The interdigital transducer (IDT) of the traditional Mach-Zehnder (MZ) acousto-optic modulator on a silicon-oninsulator (SOI) platform is located outside its two arms. The crest and trough of the surface acoustic wave (SAW) are used to modulate the two arms of the MZ interferometer so as to achieve a high modulation efficiency. Therefore, the distance between the two arms must be odd multiples of half acoustic wavelength. However, since the substrate is usually not uniform, the wavelength of the SAW changes as it transmits through the surface of the device. As a result, the exact distance between the two arms is difficult to choose. On the other hand, the SAW losses a portion of energy after passing through the first arm of the MZ interferometer, so the modulation of the second arm becomes much weaker. To solve these problems, we propose a new structure where its IDT is situated in the middle of the two arms of the MZ interferometer. With this scheme, the two arms of the MZ interferometer are located exactly at the crest and the trough of the SAW, while they are modulated with equal strength. In this paper, we first use the finite element method to simulate the acoustic frequency and the surface displacement of the excited SAW. Then we deduce the refractive index variations of all layers according to their acousto-optic effects. After that, we analyze the influences of different factors on the acousto-optic modulation efficiency, including the type and size of waveguide, the thickness of zinc oxide (ZnO) layer, and the area it covers, the number of electrodes, etc. These parameters are accordingly optimized to enhance the modulation efficiency. Modeling result based on COMSOL Multiphysics indicates that when the width of the strip waveguide is 6 mu m, the ZnO layer covers only the area under the IDT and has a thickness of 2.2 mu m, and the number of the electrodes is 50, the effective refractive index variation of the waveguide reaches 4.08 x 10(-4) provided that the amplitude of the driving voltage is 1 V. This value is 12% higher than that of the traditional structure.

On-chip Ce:YIG/Si Mach-Zehnder Optical Isolator with Low Power Consumption

A magneto-optical isolator based on series-coupled race-track resonators

A Capacitively Coupled Digital Isolator with CMTI of 162 kV/μs and Data Rate of 230 Mbps

High-Performance Electro-Optic Modulator on Silicon Nitride Platform with Heterogeneous Integration of Lithium Niobate

Enhancing the magneto-optical effects in low-biased gyromagnetic media via photonic doping.

On-Chip Broadband, Compact TM Mode Mach–Zehnder Optical Isolator Based on InP-on-Insulator Platforms

An improved Mach-Zehnder acousto-optic modulator on a silicon-on-insulator platform

Compact and Low Loss Magneto-Optical Waveguide Isolator for TE Mode Based on Lithium Niobate on Insulator

Hybrid graphene/silicon integrated optical isolators with photonic spin-orbit interaction

Coin Paradox Spin-Orbit Interaction Enhances Magneto-Optical Effect and Its Application in On-Chip Integrated Optical Isolator

Design and fabrication of a monolithic optoelectronic integrated circuit chip based on CMOS compatible technology

Monolithic integration of broadband optical isolators for polarization-diverse silicon photonics

All dielectric integrable optical isolators

Integrated optical isolators based on two-mode interference couplers

Optical isolator based on chiral light-matter interactions in a ring resonator integrating a dichroic magneto-optical material

Chip‐Based Optical Isolator and Nonreciprocal Parity‐Time Symmetry Induced by Stimulated Brillouin Scattering

Integrated optical isolators using electrically driven acoustic waves

Electro-optical silicon isolator

Design of Polarization-Independent Magneto-Optical Waveguides

Asymmetric Multimode Interference Isolator Based on Nonreciprocal Phase Shift

Electrically driven linear optical isolation through phonon mediated Autler-Townes splitting