Abstract:When core melt occurs in severe accident in Sodium Cooled Fast Reactor (SFR), molten core material moves to the lower plenum in reactor vessel and fragmented by fuel coolant interaction. These fragmented particles, so called debris, accumulate on the structure surface to form debris bed. If the thickness of the debris bed exceeds the coolable thickness of the decay heat, boiling of sodium occurs inside the debris bed. It is found from past in-pile experiments that the sodium flow and boiling inside the debris bed caused by a decay heat planarize the debris bed to lower the debris bed thickness. This mechanism is called self-leveling of debris bed. In the accident sequence of SFR, when fuel debris locally accumulates beyond the coolable thickness, fuel debris remelts with decay heat and they cannot be retained in-vessel. However, it is expected that the debris bed thickness lowers the coolable thickness with self-leveling phenomenon and they can be safely retained in-vessel. This is why an appropriate assessment for self-leveling behavior is important for safety analysis of SFR with the object of safety cooling of fuel debris. Therefore, the object of this study is to develop new analytical methods to simulate unique phenomena in self-leveling behavior and implement it to SFR safety analysis code. The characteristic of self-leveling is that when the larger external forces caused by environmental fluids are larger than a threshold value, the debris bed is fluidized. The new methods are developed with assuming that the debris bed behaves as Bingham fluid from this feature. They are categorized into two main parts. The first part is particle interaction models to model the effect of particle-particle contacts and collisions. Particle pressure and particle viscosity related to particle-particle collisions and contacts, respectively, are applied to pressure and viscosity term in the particle momentum equation. The second part is a large deformation method, which simulates Bingham fluid characteristic of debris bed. This method numerically judges a onset of debris bed fluidization which depends on a shear stress strength. An experimental study of self-leveling behavior, in which the particle bed behavior driven by bubbles inflow from the bottom of bed in gas-solid-liquid three-phase flow was observed, is analyzed to validate the new methods. Simulation results well reproduced the transient changes of particle bed, whose elevation angle and form deformation becomes gradually small and obscure, respectively. Their dependencies on particle size and density are also well simulated with new methods. The assessment results show that these methods provide a basis to develop analytical methods of self-leveling behavior of debris bed in the safety assessment of SFRs.

Study on the Remelting Process of the Debris Bed in the Lower Head of Reactor Pressure Vessel Based on Lattice Boltzmann Method

A Scoping Study on Remelting Process of a Debris Bed in the Lower Head of Reactor Pressure Vessel

Transient Simulation on Reactor Core Melt and Lower Support Plate Ablation in In-Vessel Retention

Numerical Analysis of Melt Migration and Solidification Behavior in LBR Severe Accident with MPS Method

Study on Melt Stratification and Migration in Debris Bed Using the Moving Particle Semi-Implicit Method

Numerical simulation on melting and solidification based on lagrangian approach

Development of Assessment Method for a Self-Leveling Behavior of Debris Bed and Analyses of Experiments

Experimental and Numerical Research on the Debris Bed Formation in Severe Accidents of Nuclear Reactors

Study on Heat Transfer Behavior of a Rectangular Particle Bed with Volumetric Heating

Development of MPS Method and Analytical Approach for Investigating RPV Debris Bed and Lower Head Interaction in 1F Units-2 and 3

Study of natural convection heat transfer in molten pool for advanced large size PWR

Transient Heat Transfer and Crust Evolution During Debris Bed Melting Process in the Hypothetical Severe Accident of HPR1000

Numerical Study on the Heat Transfer Characteristics of Live-L4 Melt Pool with A Partial Solidification Process

Simplified model for efficient calculation of debris bed melting process in the hypothetical severe accident of HPR1000

Effect of metal layer height on heat transfer inside molten pool

Transient Heat Transfer Analysis of Double-Layer Molten Pool under Severe Accident

Experiment Study on the Flow Mechanism of the Molten Pool Relocation Using Simulant Materials at Room Temperature

Numerical Analysis of the Melt Behavior in a Fuel Support Piece of the BWR by MPS

Study on Structural Integrity of Reactor Pressure Vessel with Various Ablation under Core Meltdown Accident

Numerical Study on Cladding Melting and Melt Migration Behavior in Lead-Bismuth Coolant Using the Improved MPS Method

THE MODEL DEVELOPMENT AND VALIDATION OF DEBRIS BED REMELTING AND MOLTEN POOL FORMATION AFTER SEVERE ACCIDENT IN PWR