Abstract:When core melt occurs in severe accident in Sodium Cooled Fast Reactor (SFR), molten core material moves to the lower plenum in reactor vessel and fragmented by fuel coolant interaction. These fragmented particles, so called debris, accumulate on the structure surface to form debris bed. If the thickness of the debris bed exceeds the coolable thickness of the decay heat, boiling of sodium occurs inside the debris bed. It is found from past in-pile experiments that the sodium flow and boiling inside the debris bed caused by a decay heat planarize the debris bed to lower the debris bed thickness. This mechanism is called self-leveling of debris bed. In the accident sequence of SFR, when fuel debris locally accumulates beyond the coolable thickness, fuel debris remelts with decay heat and they cannot be retained in-vessel. However, it is expected that the debris bed thickness lowers the coolable thickness with self-leveling phenomenon and they can be safely retained in-vessel. This is why an appropriate assessment for self-leveling behavior is important for safety analysis of SFR with the object of safety cooling of fuel debris. Therefore, the object of this study is to develop new analytical methods to simulate unique phenomena in self-leveling behavior and implement it to SFR safety analysis code. The characteristic of self-leveling is that when the larger external forces caused by environmental fluids are larger than a threshold value, the debris bed is fluidized. The new methods are developed with assuming that the debris bed behaves as Bingham fluid from this feature. They are categorized into two main parts. The first part is particle interaction models to model the effect of particle-particle contacts and collisions. Particle pressure and particle viscosity related to particle-particle collisions and contacts, respectively, are applied to pressure and viscosity term in the particle momentum equation. The second part is a large deformation method, which simulates Bingham fluid characteristic of debris bed. This method numerically judges a onset of debris bed fluidization which depends on a shear stress strength. An experimental study of self-leveling behavior, in which the particle bed behavior driven by bubbles inflow from the bottom of bed in gas-solid-liquid three-phase flow was observed, is analyzed to validate the new methods. Simulation results well reproduced the transient changes of particle bed, whose elevation angle and form deformation becomes gradually small and obscure, respectively. Their dependencies on particle size and density are also well simulated with new methods. The assessment results show that these methods provide a basis to develop analytical methods of self-leveling behavior of debris bed in the safety assessment of SFRs.

Development of MPS Method and Analytical Approach for Investigating RPV Debris Bed and Lower Head Interaction in 1F Units-2 and 3

A Multiphase MPS Method Coupling Fluid–solid Interaction/phase-Change Models with Application to Debris Remelting in Reactor Lower Plenum

Analysis of Hemispherical Vessel Ablation Failure Involving Natural Convection by MPS Method with Corrective Matrix

Estimation of Debris Relocation and Structure Interaction in the Pedestal of Fukushima Daiichi Nuclear Power Plant Unit-3 with Moving Particle Semi-implicit (MPS) Method

Sensitivity Analysis of Core Slumping and Debris Quenching Behavior of Fukushima Daiichi Unit-3 Accident

Investigation on Multilayer Failure Mechanism of Rpv with A High Temperature Gradient from Core Meltdown Scenario

Sensitivity Study of Melt Behavior of Fukushima Daiichi Unit 1 Type Accident with Melcor Code and Mps Method

Improvement of solidification model and analysis of 3D channel blockage with MPS method

Ablation Analysis with MPS for Proposing Ex-Vessel Corium Spreading Management in Light Water Reactors

Creep and Damage Analysis of Reactor Pressure Vessel Considering Core Meltdown Scenario

Study on Melt Stratification and Migration in Debris Bed Using the Moving Particle Semi-Implicit Method

Creep Deformation and Damage Behavior of Reactor Pressure Vessel under Core Meltdown Scenario

Structural Integrity Investigation for RPV with Various Cooling Water Levels under Pressurized Melting Pool

Investigation on the RPV Structural Behaviors Caused by Various Cooling Water Levels under Severe Accident

Investigation on Accident Progression and Melt Behavior at the Fukushima Daiichi Units 1 and 2 Using MELCOR Code

Comparative Study on Reactor Pressure Vessel Failure Behaviors with Various Geometric Discontinuities under Severe Accident

Development of Assessment Method for a Self-Leveling Behavior of Debris Bed and Analyses of Experiments

Investigation on Structural Behaviors of Reactor Pressure Vessel with the Effects of Critical Heat Flux and Internal Pressure

Numerical Analysis of Melt Migration and Solidification Behavior in LBR Severe Accident with MPS Method

Study on the Remelting Process of the Debris Bed in the Lower Head of Reactor Pressure Vessel Based on Lattice Boltzmann Method

Study on Structural Failure of RPV with Geometric Discontinuity under Severe Accident