Abstract:A distributed parameter model has been proposed for the transient heat transfer calculation of IVR in this paper. The model, composed by the free convection model based on empirical correlations and the isothermal solidification model based on the moving boundary method, has been verified with the LIVE-L5L experiment. The result deviations of key parameters, including the average temperature of molten pool, the heat flux distribution on boundary, and the growth rate of solidified crust, are evaluated by comparing with the experimental data. The validation indicates that, for LIVE-L5L experiment within the Ra' magnitude of 10(12)-10(14), Asfia-Dhir formula is optimal to calculate the averaged Nusselt number (Nu). And the errors caused by using the empirical correlations to calculating the transient free convection are acceptable. Besides, the moving boundary method under the isothermal assumption is also applicable for calculating the dynamic solidification on the pool boundary. When the internal heat changes, both the thermal non-equilibrium on the solid-liquid interface and the pulse shape of the crust's growth rate can be well simulated. And a stable result for interface tracking (or thickness change) can also be obtained. Next, to show the model performance, the work chooses an IVR scenario in SMR (220 MW thermal power) for test. The calculation results show that, the maximum estimation result for the molten pool's internal heat (Q(m)) is 0.42 MW/m(3). And the corresponding peak heat flux (q(m)(theta)) can reach 267.5 kW/m(2). Even in the maximum heat load moment, the maximum temperature on inner wall (T-w,T-in(theta)) only reaches 1318.1 K. When the molten pool enters into the long-term cooling, the peak heat flux will remain around 170.5 kW/m(2). Another, At the upper position with large circumferential angle, the higher heat flux will make the crust form thinner. Thus, the local wall temperature of vessel will be higher by this combined effect of large heat load and small thermal resistance. But it can't destroy the integrity of the pressure vessel. Research of this paper can provide references for the safety design of SMR.

Transient Simulation on Reactor Core Melt and Lower Support Plate Ablation in In-Vessel Retention

Numerical Study on Core Transient Heat Transfer and Melt Process after LOCA

Numerical Simulation Of Core Temperature And Melting Process Of Ivr Core After A Severe Water Loss Accident

Transient Heat Transfer Analysis of Double-Layer Molten Pool under Severe Accident

COPRA Experiment and Numerical Research on the Behavior of Internally-Heated Melt Pool with Eutectic Salt

Transient Heat Transfer and Crust Evolution During Debris Bed Melting Process in the Hypothetical Severe Accident of HPR1000

Study on the safety characteristics of molten corium in-vessel retention of annular fuel core

Study of natural convection heat transfer in molten pool for advanced large size PWR

In- and Ex-Vessel Coupled Analysis of IVR-ERVC Phenomenon for Large Scale PWR

Study on Structural Integrity of Reactor Pressure Vessel with Various Ablation under Core Meltdown Accident

Analysis of Safety Margin of In-Vessel Retention for AP1000

Investigation on Structural Behaviors of Reactor Pressure Vessel with the Effects of Critical Heat Flux and Internal Pressure

Simulation Model for Investigating Safety Margin of Three-Layer Molten Pool after Late Phase In-Vessel Water Injection

Investigation on Multilayer Failure Mechanism of Rpv with A High Temperature Gradient from Core Meltdown Scenario

IVR-ERVC Study of 1700 MW Class PWR Based on MAAP Simulation and Coupled Analysis

Study on the Remelting Process of the Debris Bed in the Lower Head of Reactor Pressure Vessel Based on Lattice Boltzmann Method

Structural Integrity Investigation for RPV with Various Cooling Water Levels under Pressurized Melting Pool

NUMERICAL STUDY ON CONVECTION HEAT TRANSFER FOR EXTERNAL REACTOR VESSEL COOLING

Thermal Loading Failure Analysis of Molten Pool in the Reactor Vessel

A Simple Novel Analysis Procedure for IVR Calculation in Core-Molten Severe Accident

Model Development for the Transient Heat Transfer in a Corium Pool