Abstract:In the severe accident of nuclear reactors, the melt stratification and migration in debris bed directly affect the melt heat transfer characteristics and the heat flux distribution on the lower head wall, which in turn affect the follow-up accident progressions including the pressure vessel failure mode, melt leakage, and molten corium concrete interaction. They are the key issues in nuclear reactor severe accident research. In the present study, the MPS method was applied to analyze melt stratification and migration in debris bed by including the models of radiation heat transfer among debris, melt phase change and surface tension. To validate the numerical method, the experiment was performed using the metal fin and ternary nitrate as the core melt simulant. Then, the stratification behavior of oxide and metallic core melt was investigated under varied parameters and conditions. The results indicated that the crust formed at the oxide and metal melt interface could block the stratification, which had important influence to the layered configuration. The melt contact area increased in the conditions of crust formation prior to the stratification completion. The high melt and debris temperatures and surface tension could contribute to the stratification, but the high viscous melt when undergoing phase transition needed a long time. Moreover, the comparison of melt stratification under adiabatic and isothermal boundary conditions showed that the oxide melt solidification trapped some metal melt in the voids. The penetration distance of metal melt in the oxide debris bed increased rapidly in the initial moment and gradually in the following moment and finally the migration was terminated by melt crust. The melt penetration distance increased as the increase of debris bed porosity and melt and debris temperatures.

Numerical Study on Cladding Melting and Melt Migration Behavior in Lead-Bismuth Coolant Using the Improved MPS Method

Numerical Analysis of Melt Migration and Solidification Behavior in LBR Severe Accident with MPS Method

Numerical Study of Fuel Melting and Molten Migration Based on the MPS Method

Numerical Analysis of the Melt Behavior in a Fuel Support Piece of the BWR by MPS

Study on Melt Stratification and Migration in Debris Bed Using the Moving Particle Semi-Implicit Method

Numerical Analysis of the Corium Behavior Within the Fuel Support Piece by Mps

Improvement of solidification model and analysis of 3D channel blockage with MPS method

Numerical simulation on melting and solidification based on lagrangian approach

NUMERICAL INVESTIGATION ON THE MELTING BEHAVIOR MECHANISM OF FUEL ROD USING MPS-CV METHOD

Numerical Study on Core Transient Heat Transfer and Melt Process after LOCA

Analysis of Lead–bismuth Eutectic-Cooled Solid Reactor under Flow Blockage Accident by 3D Neutronics Thermal-Hydraulics Coupling Method

Numerical Study on the Heat Transfer Characteristics of Live-L4 Melt Pool with A Partial Solidification Process

Development of an MPS Code for Corium Behavior Analysis: 3D Alloy Melting

Three-dimensional Numerical Study on the Effect of Sidewall Crust Thermal Resistance on Transient MCCI by Improved MPS Method

Numerical Investigation of Melt Fragmentation in Sodium-Cooled Fast Reactor Based on Moving Particle Method

Analysis of Melt Behavior in a Cold Tube by MPS Method

Numerical Investigation on Melt Freezing Behavior in A Tube by Mps Method

Simulation on the Fragmentation Characteristics of Molten Core Materials in SFRs Using Modified MPS Method

MPS Eutectic Reaction Model Development for Severe Accident Phenomenon Simulation

Effect of block parameter on fluid flow and heat transfer in LBE-cooled fast reactor under blockage accident

A Multiphase MPS Method Coupling Fluid–solid Interaction/phase-Change Models with Application to Debris Remelting in Reactor Lower Plenum