Abstract:The major concern of the structure integrity of lead cooled reactor is the corrosion behavior of fuel cladding and other core internal materials. Magnetron sputtering technology is adopted as an surface coating method to improve the corrosion resistance of nuclear fuel cladding exposed to liquid lead-bismuth eutectic (LBE). Fe31Cr20Al17Ti16Nb16 high entropy alloy (HEA) coatings were prepared on tubular ferritic/martensitic (F/M) steel which is the candidate fuel cladding material, and the corrosion behaviors of Fe31Cr20Al17Ti16Nb16 coatings in LBE are investigated in this work. F/M steel specimens with Fe31Cr20Al17Ti16Nb16 coatings were exposed to 500 °C stagnant liquid LBE with oxygen concentration of Co ≈ 1 × 10−4 wt% and Co ≈ 1 × 10−7 wt% for 1000 h respectively. The primary findings suggest that the oxygen content of LBE mainly affects the morphology of duplex oxide layers generated during corrosion process, which resulting from the different inward diffusion flux of oxygen. In oxygen-saturated (Co ≈ 1 × 10−4 wt%) LBE, the overall oxide layer exhibits bulging and incompact morphology and infiltration of Pb is probed at inner Cr2O3 oxide layer, larger-sized cavities (the observed maximum dimension reaches 233.5 nm) distribute close to the outer Fe3O4/FeCr2O4 layer; In oxygen-depleted (Co ≈ 1 × 10−7 wt%) LBE, duplex oxide layer presents relatively dense and uniform state, tiny cavities (observed maximum dimension is 38.3 nm) dispersing at the internal of oxide areas. Corrosion rates of the Fe31Cr20Al17Ti16Nb16 coatings under two oxygen situations are 2 orders of magnitude lower than uncoated F/M steel under same exposure condition, the oxide layers with better uniformity and density produced in Co ≈ 1 × 10−7 wt% LBE indicating the better application advantage of Fe31Cr20Al17Ti16Nb16 coatings in oxygen-depleted LBE.

Microstructural Characteristics of the Internal Oxidation Zone of Ferritic/martensitic Steel Exposed to LBE at 550 °C for 1000 H

Interfacial microstructure and corrosion behavior of ODS FeCrAl alloy in oxygen-saturated lead-bismuth eutectic at 450 °C

Microstructural Evolution and Properties of Novel Ferritic Stainless Steel - Mox Prepared by Laser Melting Deposition

Corrosion behaviour of 11Cr1Si ferritic/martensitic steel in static liquid lead-bismuth eutectic at 450-550 °C

Oxidation behavior of ferritic/martensitic steels in stagnant liquid LBE saturated by oxygen at 600°C

Microstructure evolution of magnetite layer on CLAM steel exposed to lead-bismuth eutectic containing 10−6 wt% oxygen at 500 °C

Microstructural evolution of early-stage oxide film on 15–15Ti austenitic stainless steel under 500 °C steam

New insights into the oxidation mechanisms of a Ferritic-Martensitic steel in high-temperature steam

Dissolution corrosion of FeCrAl alloy exposed to oxygen-depleted lead-bismuth eutectic containing Ni impurities at 600 °C

Corrosion kinetics of T91 steel under low oxygen conditions (10 −7 wt% O) in lead-bismuth eutectic at 500 °C

Formation and disappearance of an internal oxidation zone in the initial stage of the steam oxidation of Fe–9Cr–0.26Si ferritic steel

Fretting behavior of oxide scale formed on ferritic/martensitic steel after pre-exposure to lead-bismuth eutectic

First-principles study on the corrosion resistance of iron oxide surface and grain boundary in austenitic steel to lead–bismuth eutectic

Corrosion Kinetics of T91 Steel under Low Oxygen Conditions (10-7 Wt% O) in Lead-Bismuth Eutectic at 500 ºc

Liquid metal embrittlement susceptibility of an oxide-dispersion strengthened FeCrAl alloy in contact with liquid lead-bismuth eutectic at 350 °C

Corrosion behavior of magnetron sputtering Fe31Cr20Al17Ti16Nb16 high entropy coating in liquid lead-bismuth eutectic with different oxygen concentration at 500 °C

Corrosion behavior of ZrN coated ferritic/martensitic steel in liquid lead-bismuth eutectic

Influence of temperature on the microstructural evolution of SIMP and T91 steels in liquid lead-bismuth eutectic: Experiments and molecular dynamics simulations

Corrosion Kinetics and Mechanisms of 15-15Ti Steel in Flowing Liquid Lead-Bismuth Eutectic at 500°C

Precipitation Behavior of Laves Phase in the Vicinity of Oxide Film of Ferritic Stainless Steel: Selective Oxidation-Induced Precipitation

Analysis of Oxide Layer Formation During Oxidation of AISI 4140 Steel at 1000 °C over Exposure Time