Abstract:The major concern of the structure integrity of lead cooled reactor is the corrosion behavior of fuel cladding and other core internal materials. Magnetron sputtering technology is adopted as an surface coating method to improve the corrosion resistance of nuclear fuel cladding exposed to liquid lead-bismuth eutectic (LBE). Fe31Cr20Al17Ti16Nb16 high entropy alloy (HEA) coatings were prepared on tubular ferritic/martensitic (F/M) steel which is the candidate fuel cladding material, and the corrosion behaviors of Fe31Cr20Al17Ti16Nb16 coatings in LBE are investigated in this work. F/M steel specimens with Fe31Cr20Al17Ti16Nb16 coatings were exposed to 500 °C stagnant liquid LBE with oxygen concentration of Co ≈ 1 × 10−4 wt% and Co ≈ 1 × 10−7 wt% for 1000 h respectively. The primary findings suggest that the oxygen content of LBE mainly affects the morphology of duplex oxide layers generated during corrosion process, which resulting from the different inward diffusion flux of oxygen. In oxygen-saturated (Co ≈ 1 × 10−4 wt%) LBE, the overall oxide layer exhibits bulging and incompact morphology and infiltration of Pb is probed at inner Cr2O3 oxide layer, larger-sized cavities (the observed maximum dimension reaches 233.5 nm) distribute close to the outer Fe3O4/FeCr2O4 layer; In oxygen-depleted (Co ≈ 1 × 10−7 wt%) LBE, duplex oxide layer presents relatively dense and uniform state, tiny cavities (observed maximum dimension is 38.3 nm) dispersing at the internal of oxide areas. Corrosion rates of the Fe31Cr20Al17Ti16Nb16 coatings under two oxygen situations are 2 orders of magnitude lower than uncoated F/M steel under same exposure condition, the oxide layers with better uniformity and density produced in Co ≈ 1 × 10−7 wt% LBE indicating the better application advantage of Fe31Cr20Al17Ti16Nb16 coatings in oxygen-depleted LBE.

Microstructure evolution of magnetite layer on CLAM steel exposed to lead-bismuth eutectic containing 10−6 wt% oxygen at 500 °C

Honeycomb Structure with Oxygen-Poor Pores at the Top of Magnetite Layer on a Martensitic Steel CLAM Exposed to Lead-Bismuth Eutectic at 500 ºc

Microstructure Evolution and Yield Strength of CLAM Steel in Low Irradiation Condition

Stabilities of the precipitates in CLAM steel during 30,000 h thermal aging

Preliminary Experiments on the Corrosion of CLAM Steel in Flowing Eutectic LiPb

Formation and dissolution of porous magnetite layer in contact with lead-bismuth eutectic: Locally equilibrium thermodynamic model

Corrosion behaviour of 11Cr1Si ferritic/martensitic steel in static liquid lead-bismuth eutectic at 450-550 °C

Fretting behavior of oxide scale formed on ferritic/martensitic steel after pre-exposure to lead-bismuth eutectic

Effect of LBE corrosion on microstructure of amorphous Al2O3 coating by magnetron sputtering

Corrosion behavior of magnetron sputtering Fe31Cr20Al17Ti16Nb16 high entropy coating in liquid lead-bismuth eutectic with different oxygen concentration at 500 °C

Corrosion Kinetics and Mechanisms of 15-15Ti Steel in Flowing Liquid Lead-Bismuth Eutectic at 500°C

Oxidation mechanism of refractory Molybdenum exposed to oxygen-saturated lead-bismuth eutectic at 600 °C

Long-Term Behaviors of Oxide Layer in Liquid Lead–Bismuth Eutectic (LBE), Part II: Model Applications

Microstructural evolution of early-stage oxide film on 15–15Ti austenitic stainless steel under 500 °C steam

Evolution and Formation of Non-metallic Inclusions During Electroslag Remelting of a Heat-Resistant Steel for Ultra-supercritical Power Plants

Mechanism analysis of grain refinement caused by deformation and the improvement of strength and ductility of CLAM steel

Influence of temperature on the microstructural evolution of SIMP and T91 steels in liquid lead-bismuth eutectic: Experiments and molecular dynamics simulations

The Corrosion Behavior of Al/Al2O3 Composite Films with Ultra-Dense Structure Exposed to Lead-Bismuth Eutectic at 450 to 650 °C

Growth of Inter-Metallic Compound Layers on CLAM Steel by HDA and Preparation of Permeation Barrier by Oxidation

Interfacial microstructure and corrosion behavior of ODS FeCrAl alloy in oxygen-saturated lead-bismuth eutectic at 450 °C

Liquid metal embrittlement of 12Cr ferritic/martensitic steel thin-walled tubes exposed to liquid lead-bismuth eutectic