Abstract:Abstract Today, rare-earth elements are mainly introduced in alloys in the form of misch metal, which is a natural mixture of rare-earth elements (with atomic numbers 57–71). This mixture contains about 50 wt % cerium. The primary components of the mixture are generally cerium, lanthanum, and niobium. The specific composition depends on the particular field from which they were drawn. The variable composition of this mixture may significantly impair its effectiveness in alloying. The ratio of the individual elements in the mixture cannot be determined experimentally for each grade of steel, because of the prohibitive expense of such separation. However, thermodynamic modeling permits determination of the optimal concentration of each rare-earth element and the composition of the misch metal. In the present work, thermodynamic modeling is applied to the interaction of magnesium, aluminum, and lanthanum with oxygen in liquid iron. The thermodynamic model of the reduction of steel by mixtures of such active metals is considered. On the basis of literature data regarding the phase diagrams of the MgO–Al 2 O 3 , MgO–La 2 O 3 , and La 2 O 3 –Al 2 O 3 systems, the coordinates of points of invariant equilibrium in the MgO–La 2 O 3 –Al 2 O 3 system are established. The MgO–La 2 O 3 –Al 2 O 3 phase diagram is plotted. That permits the identification of all possible equilibria in the reduction of steel by magnesium, aluminum, and lanthanum and also the determination of corresponding descriptive equations. The activity of the components in liquid oxide melts is determined by the theory of subregular ionic solutions, taking account of the influence of the oxide melt’s composition on the coordination number of the cations. The activity of the components in metallic melts that are conjugate with the oxide systems is determined by means of the Wagner theory on the basis of first-order reaction parameters. The equilibrium constants of the reduction of steel by the given elements are established by indirect thermodynamic calculations. On the basis of the results, the solubility surface of the components in Fe–Mg–Al–La–O melts is constructed. That permits the identification of regions where the composition of the liquid metal corresponds to a particular oxide phase.

Formation and dissolution of porous magnetite layer in contact with lead-bismuth eutectic: Locally equilibrium thermodynamic model

Towards atomistic modelling of solid Pb-O formation and dissolution in liquid lead coolant: interatomic potential development

Oxygen-iron interaction in liquid lead-bismuth eutectic alloy

Long-Term Behaviors of Oxide Layer in Liquid Lead–Bismuth Eutectic (LBE), Part II: Model Applications

Microstructure evolution of magnetite layer on CLAM steel exposed to lead-bismuth eutectic containing 10−6 wt% oxygen at 500 °C

Modeling of oxidation of structural materials in LBE systems

An Atomistic Insight into the Corrosion of the Oxide Film in Liquid Lead-Bismuth Eutectic.

Long-Term Behaviors of Oxide Layer in Liquid Lead–Bismuth Eutectic (LBE), Part I: Model Development and Validation

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

THERMODYNAMICS OF THE PROCESSES OF INTERACTION OF LIQUID METAL COMPONENTS IN Fe – Mg – Al – La – O SYSTEM

Analytical model of the oxide layer build-up in complex lead-cooled systems

Wetting and Spreading Behavior of Molten Iron in Contact with Graphite Substrate: Interfacial Effects

Honeycomb Structure with Oxygen-Poor Pores at the Top of Magnetite Layer on a Martensitic Steel CLAM Exposed to Lead-Bismuth Eutectic at 500 ºc

Titanium monoxide and titanium dioxide thin film formation by magnetron sputtering and its thermodynamic model

A multi-phase-field model of topological pattern formation during electrochemical dealloying of binary alloys

Corrosion Kinetics and Mechanisms of 15-15Ti Steel in Flowing Liquid Lead-Bismuth Eutectic at 500°C

Thermodynamics of the Interactions in Fe–Mg–Al–La–O Melts

Insights into the Corrosion Mechanism of a 12cr F/M Steel in Oxygen-Saturated Liquid LBE

THERMODYNAMIC MODELING OF PHASE EQUILIBRIA AT STEEL ALLOYED WITH MANGANESE AND CHROME

A Model for Solidification under the Influence of Thermoelectric and Magnetohydrodynamic Effects: Application to Peltier Demarcation During Directional Solidification with Different Gravitational Conditions

Early stages of dissolution corrosion in 316L and DIN 1.4970 austenitic stainless steels with and without anticorrosion coatings in static liquid lead-bismuth eutectic (LBE) at 500$^\circ$C