Abstract:Within the framework of the proposed research, emphasis was placed on application of magnetic fields to semiconductor growth systems. Through complementary support by the Air Force and DARPA, we were able to acquire a superconducting magnet which can provide axial magnetic fields of up to 30 kGauss for melt stabilization in the NASA facility for heat pipe based vertical BridgmanStockbarger growth. It was found that axial fields up to 3 kGauss do not affect the growth behavior nor the macro-segregation behavior in the system Ge(Ga). Applied fields are found to significantly alter the radial dopant distribution, which is attributed to alterations in the spatial orientation of convective cells. Increasing the applied magnet field to 30 kGauss is found to have a fundamental effect on dopant segregation. The initial transient segregation behavior is identical with that predicted by Tiller e t al. for diffusion controlled plane front solidification. Within the transient region, the dopant concentration increased by in excess of 600%, a concentration increase which in the magnitude has thus far only been observed in the ASTP experiment conducted in the reduced gravity environment of space. While the apparent achievement of diffusion controlled growth, as indicated by theory, is contingent on the validity of the available database, the experimental results demonstrate that magnetic melt stabilization can be valuable in emulating a limited spectrum of reduced gravity conditions. The experiments also point to the need, in space, for extended equilibration of melts prior to solidification, and alternatively, at the need for force convective mixing in a microgravity environment. . Emphasis was also place on the exploration of the potential of KC-135 flights for preliminary studies of the effects of reduced gravity environment on the wetting behavior of semiconductor systems in growth configuration. The experiments indicated different solidification characteristics; however, it was not possible to obtain quantitative data on wetting. The primary problem consisted of deficiencies of the available hardware. The limited number of experiments conducted does not permit any conclusions on the merits of KC-135 flights for semiconductor processing research. It is established, however, that the effective use of this facility will require acquisition of appropriate hard ware. At professional meetings, presentations were made on the potential of reduced gravity environment of R&D in materials processing. -49https://ntrs.nasa.gov/search.jsp?R=19890004306 2019-11-28T09:08:54+00:00Z

A Model for Solidification under the Influence of Thermoelectric and Magnetohydrodynamic Effects: Application to Peltier Demarcation During Directional Solidification with Different Gravitational Conditions

Thermoelectric Interface Demarcation During Directional Solidi cation With Varying Gravitationally-Dependent Buoyancy Convection Submitted to Journal of Heat Transfer

Numerical Studies of Semiconductor Materials Solidification With Applied Electric and Magnetic Fields

Heat Flow Control and Segregation in Directional Solidification: Development of an Experimental and Theoretical Basis for Bridgman-Type Growth Experiments in a Microgravity Environment

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

Thermoelectric effects on interface demarcation and directional solidification of bismuth

Concentration and Fluid Flow Effects on Kinetics, Dendrite Remelting and Stress Accumulation Upon Rapid Solidification of Deeply Undercooled Alloys

Dendritic Solidification of Highly Undercooled Dilute Alloys

A Phase Field Model Coupled with Pressure-Effect-embedded Thermodynamic Modeling for Describing Microstructure and Microsegregation in Pressurized Solidification of a Ternary Magnesium Alloy

Multiphase Flow in Directional Solidification of Metal Matrix Particulate Composites

Numerical analysis for solid-liquid interface shape at various temperature gradient in electromagnetic cold crucible directional solidification

A Eulerian Numerical Model to Predict the Enhancement Effect of the Gravity-Driven Motion Melting Process for Latent Thermal Energy Storage

Modelling Of The Thermosolutal Convection And Macrosegregation In The Solidification Of An Fe-C Binary Alloy

Multiscale dendritic needle network model of alloy solidification with fluid flow

Effect of forced convection on the formation of the as-cast structure and macrosegregation of Sn-10wt.% Pb alloy: A numerical study

Three-dimensional simulation of thermosolutal convection and macrosegregation in steel ingots

Development and Numerical Testing of a Model of Equiaxed Alloy Solidification Using a Phase Field Formulation

Simulation of the dendrite growth during directional solidification under steady magnetic field using three-dimensional cellular automaton method coupled with Eulerian multiphase

Direct Numerical Simulation of Solid Deformation During Dendritic Solidification

Effects of Applied Electric Fields on Interface Dynamics and Microstructure Formation During Directional Solidification of BiMn/Bi Eutectic

Thermoelectric magnetohydrodynamic flow in a liquid metal-infused trench