Abstract:Micro-electro-mechanic-system (MEMS) devices on flexible substrate are important for non-planar and non-rigid surface applications. In this paper, a novel and cost-effective fabrication process for an 8×8 MEMS temperature sensor array with a lateral dimension of 2.5mm×5.5mm on a polyimide flexible substrate is developed. A 40μm thick polyimide substrate is formed on a rigid silicon wafer using as a mechanical carrier throughout the fabrication by four successive spin coating liquid polyimide. The arrayed temperature sensing elements made of 1200Å sputtered platinum thin film on polyimide substrate show excellent linearity with a temperature coefficient of resistance of 0.0028/°C. The purposed sensor obtains a high sensitivity of 0.781Ω/°C at 8mA at constant drive current. Because of the low heat capacity and excellent thermal isolation, the temperature sensing element shows excellent high sensitivity and a fast thermal response. The finished devices are flexible enough to be folded and twisted achieving any desired shape and form. Employing spin-coated liquid polyimide substrate instead of solid polyimide sheet minimizes the thermal cycling as well as improves the production yield. This fabrication technique first introduces the spin-coated PDMS (Polydimethylsiloxane) interlayer between the silicon carrier and the polyimide substrate and makes the polyimide-based devices separate much easier and greatly simplifies the fabrication process with a high production yield. A non-successive two-stage cure procedure for the polyimide precursor is developed to meet low-temperature requirement of the PDMS interlayer. The fabrication procedure developed in this research is compatible with conventional MEMS technology through an optimized integration process. The novel flexible MEMS technology can benefit the development of other new flexible polyimide-based devices.

A Robust Electrothermal Micromirror Based on Photosensitive Polyimide (PSPI) - Al Bimorphs

Study of A Deformable Micro-Mirror Based on Pzt Films

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

Research on PZT-based Deformable Micro-mirror Array in Adaptive Optics

State-of-the-Art Materials Used in MEMS Micromirror Arrays for Photonic Applications

An Electromagnetically-Driven MEMS Micromirror for Laser Projection.

Novel MEMS Torsional Mirror Optical Switch

Design of an Electrostatic Silicon Torsion Micromirror for Low Drive Voltage and Wide Angle MEMS Optical Switch Applications

A polymer trench filling based silicon isolation technique and its application to two-axis scanning comb-drive micromirrors

An Improved Electrostatically-Driven Micro Torsion Mirror Fabricated by Silicon Micromachining for Optical Switching Devices

A Large-Scan-Range Electrothermal Micromirror Integrated with Thermal Convection-Based Position Sensors

FR4-Based Electromagnetic Scanning Micromirror Integrated with Angle Sensor

A novel quasi-static MEMS piezoelectric micromirror array with a high fill factor and three degrees of freedom

A Novel Fabrication Process of MEMS Devices on Polyimide Flexible Substrates

Electromagnetically Driven MEMS Micromirror with Torsion Beam Structure

A Novel Electrostatically Driven Micromirror with Lateral Comb Actuators and T-Shaped Torsion Bars

Dual-Axis Piezoelectric Mems Micromirror with Adjustable Aspect Ratio of Lissajous Patterns Through Structure Design and Electrode Arrangement

CMOS-MEMS Based Optical Electrostatic Phase Shifter Array With Low Driving Voltage and High Fill Factor

A 19-Element Segmented MEMS Deformable Mirror Based on Electrostatic Repulsive-Force Actuator

Hybrid Electrostatic Actuator for Micromirror Tilting

Experimental Investigation of Vibration Isolator for Large Aperture Electromagnetic MEMS Micromirror