Abstract:The low-voltage electric machine (EM) is a core technology for transportation electrification, and features like high power density and compact volume are essential prerequisites. However, these requirements are usually in conflict with the reliability property of EM, especially in the safety-critical industry such as aviation. Therefore, an appropriate balance between high-performance and reliability needs to be found. Often, the over-engineering method is applied to ensure safety, although it might have a detrimental effect on the EM volume. To address this issue, the EM reliability assessment is included at the EM design stage through the physics of failure (PoF) theory. In EMs, the windings play a key role in electromechanical energy conversion, but their insulation system is subject to frequent failure and represents a reliability bottleneck. Therefore, in-depth research on the root causes of insulation breakdown is beneficial for EM reliability improvement purposes. Indeed, increasing awareness and knowledge on the mechanism of the insulation degradation process and the related lifetime modeling enables the growth of appropriate tools for achieving reliability targets since the first EM design steps. In this work, the main aspects of the insulation system, in terms of materials and manufacturing, are first reviewed. Then, the principal stresses experienced by the winding insulation system are deeply discussed with the purpose of building a profound understanding of the PoF. Finally, an overview of the most common insulation lifetime prediction models is presented, and their use for accomplishing the reliability-oriented design (RoD) and the remaining useful life (RUL) estimation are examined.

Lifetime Model for Inverter-fed Electrical Machines Windings Including Thermal Aging and Partial Discharge Risk

Insulation for Rotating Low-Voltage Electrical Machines: Degradation, Lifetime Modeling, and Accelerated Aging Tests

Time-to-Failure Analysis of Short-Duty Cycle, Inverter-Fed Electrical Machines Exposed to Prevailing Electrical Stress

Insulation Lifetime Evaluation of Electrical Machines under Electrical Aging and Thermal Overload Transient

Moving Toward Partial Discharge-Free Design of Electrical Machines for More Electric Aircraft Applications

Lifetime Estimation of Corona-Resistance Wire for Electrical Machines Operating under the Partial Discharge Regime

Research on Electrical Aging Lifetime Model of Insulation Material under High Voltage Square Impulses for Inverter-Fed Motors

Insulation Life-Span Models for Electrical and Thermal Aging under Continuous High Square Impulses Voltage

Life Models Of Polyimide Film Under Combined Thermal And Electrical Stresses Used In Inverter-Fed Traction Motor

Investigation On Aging Mechanism Of Winding Insulation Used In Inverter-Fed Traction Motors

Determination of Hotspot Temperature Margin for Rectangular Wire Windings Considering Insulation Thermal Degradation and Partial Discharge

Reliability-Oriented Multi-Objective Optimization of Electrical Machines Considering Insulation Thermal Lifetime Prediction

Derivation of Ambient Enhancement Factors of Impregnated Twisted pairs for Partial Discharge Risk Evaluation

Insulation Capacitance As Diagnostic Marker for Thermally Aged, Low Voltage Electrical Machines

The Winding Insulation Electro-Thermal Aging Model of Electric Vehicle Motor Based on Operation States

Voltage rise rate‐related generalised probabilistic lifetime model of turn‐to‐turn insulation in inverter‐fed motors

Effect of Test Voltage Waveforms on Partial Discharge Inception Voltage Considering Different Environmental Conditions

Reliability-Oriented Multiobjective Optimization of Electrical Machines Considering Insulation Thermal Lifetime Prediction

Reliability vs. Performances of Electrical Machines: Partial Discharges Issue

Study on Aging Characteristics for Inverter-Fed Traction Motor Inter-Turn Insulation Based on Analysis of Dielectric Characteristic Parameters

Electrical Aging Law of Winding Insulation for Pulse Width Modulation Inverter-Fed Traction Motor