Abstract:The inter-turn short circuit of field windings in synchronous machines will cause the field current to increase and reactive power output to decrease. It will also introduce the aggravation of vibration. To achieve online fault monitoring and protection, electrical quantities such as fault currents of stator and rotor must be calculated accurately and efficiently. In this paper, based on the multi-loop theory and the steady-state characteristics of stator and rotor fault currents, the steady-state expression of each loop current is obtained first. Then, differential equations in the steady-state system are reduced into linear equations to acquire the steady-state mathematical model on inter-turn short circuit of field windings. This is based on the principle that components of the same frequency are equal. By solving the linear equations using Gaussian elimination, the steady-state solution of the AC and DC components of each loop current can be obtained and the steady-state calculation of the fault can be achieved rapidly. The field winding inter-turn short circuit experiments have been carried out on a 12 kW synchronous machine with three pairs of non-salient poles on no-load. The results show very good match with that of steady-state simulations. The steady calculation method proposed can save nearly ninety percent of the computational time compared with the transient simulation approach. It provides a useful foundation for the inter-turn short circuit fault detection and protection of the field windings in synchronous machines. © 2010 State Grid Electric Power Research Institute Press.

Voltage Distribution Analysis of High Dv/dt Fed Machines Using High Frequency Winding Model

Common-Mode Frequency of Power Systems Affected by Voltage Dynamics

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

Modeling and Analysis of Switching Frequency Circulating Currents in Parallel Inverter Systems

Study on Voltage Distribution in Windings of an Inverter-Fed Traction Motor

High-frequency modeling based EMC performance improvement of power supplies in inverters

Interturn Voltage Stress Comparation and Analysis of Different Typology of Hairpin Windings for EV Traction Machines

Voltage Stress Calculation and Measurement for Hairpin Winding of EV Traction Machines Driven by SiC MOSFET

A Coupled 3D FEM-Distribute Circuit Model for Numerical Analysis of Small Time Scale Transients of an IGBT based Inverter

Analysis of Inter-Turn Insulation of High Voltage Electrical Machine by Using Multi-Conductor Transmission Line Model

Commutation Overlap Characteristic Modeling and Stability Analysis of LCC-HVDC in Sending AC Grid

Insulation Life-Span Models for Electrical and Thermal Aging under Continuous High Square Impulses Voltage

Steady-state Mathematical Modeling and Simulation of Inter-turn Short Circuit of Field Windings in Synchronous Machines

Modeling and Evaluation of Winding Losses in High Voltage Planar Transformers

Analysis Of Voltage Waveform At The Stator Terminal Of Pwm Inverter Fed Motors

Numerical Analysis Of Lightning Transient Voltage Distributions In Hv Converter Transformer Winding

Research on Electrical Aging Lifetime Model of Insulation Material under High Voltage Square Impulses for Inverter-Fed Motors

Loss analysis and calculation of IPMSM with SiC inverter based on field circuit coupling method

Influence Analysis of Oscillation Harmonics in LCC-HVDC Delivery System Based on Impedance Modeling.

Analysis of the Medium-Frequency Oscillation Issue in a Medium-Voltage High-Power Wind Energy Conversion System

Numerical Modeling, Electrical Characteristics Analysis and Experimental Validation of Severe Inter-Turn Short Circuit Fault Conditions on Stator Winding in DFIG of Wind Turbines