Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Multi-Loop Model Based Internal Fault Analysis of Variable Speed Pumped Hydro Machines

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

Analysis and Reduction of Inherent Shaft Voltage in Interior Permanent Magnet Synchronous Machines

Modeling and Realization of Multiphase Permanent Magnet Synchronous Motor Variable Speed System

Modeling and Simulation of Non-Linear Dynamic Process of the Induction Motor System with Fluctuating Potential Loads

Harmonic Model and Remedy Strategy of Multiphase PM Motor under Open-Circuit Fault

Reasonable Simplification of the Multi-loop Model of the Large Hydro Generators

Dynamic Modeling of Surface-Mounted Permanent Magnet Motors Considering Saturation

Simulation and Analysis of Squirrel Cage Induction Machines under Rotor Internal Faults

Modeling and Analysis of Rotor Current of DFIG with Rotor Chopper Circuit Operative Condition During Three-Phase Symmetric Faults

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

Modeling of a Novel 12-Stator-Pole/10-Rotor-Tooth Doubly-Fed Flux-Switching Permanent Magnet Machine

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

Steady-state Mathematical Modeling and Simulation of Inter-turn Short Circuit of Field Windings in Synchronous Machines

Modeling of Interturn Short Fault in Interior Permanent Magnet Synchronous Motors with Multistrand Windings

Modeling and Transient Response Analysis of Doubly-Fed Variable Speed Pumped Storage Unit in Pumping Mode

Fault Analysis for Inverter Driven Dual-Winding PMSMs

Simplified Mathematical Model of Inter-Turn Short Circuit of Field Windings in Hydro-Generators and Its Application

Calculation of the Multi-loop Inductances for Inter-turn Short Circuits of Field Windings in Non-salient Pole Synchronous Machines