Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Modeling and Analysis of Rotor Current of DFIG with Rotor Chopper Circuit Operative Condition During Three-Phase Symmetric Faults

Model parameter identification of DFIG based on short circuit current

Stator Fault Detection Of Doubly-Fed Induction Generators Using Rotor Instantaneous Power Spectrum

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Studies on Electromagnetic Characteristics of DFIG under Short-Circuit Faults of the Grid

Transient Characteristic Modeling of DFIG Considering Control Loop under Grid Voltage Fault

Model of Stator Inter-Turn Short Circuit Fault in Doubly-Fed Induction Generators for Wind Turbine

Modeling and Control of a Wind-Turbine-driven DFIG Incorporating Core Saturation During Grid Voltage Dips

A Control Strategy for Doubly-fed Induction Generator Wind Turbines under Asymmetrical Grid Voltage Conditions Caused by Faults

Numerical Modeling, Electrical Characteristics Analysis and Experimental Validation of Severe Inter-Turn Short Circuit Fault Conditions on Stator Winding in DFIG of Wind Turbines

Research on Short-Circuit Current Calculation Method of Doubly-Fed Wind Turbines Considering Rotor Dynamic Process

A Novel Doubly Fed Induction Generator System with Fault Ride Through Capability

Incipient Fault Detection and Condition Assessment in DFIGs Based on External Leakage Flux Sensing and Modified Multiscale Poincare Plots Analysis

Multiscale Park's Vector Approach for Identifying Early Stator Fault Severity Using MCSA in DFIGs

Simulation and Analysis of Squirrel Cage Induction Machines under Rotor Internal Faults

Improved Dual-Pi Rotor Current Control Scheme for a Wind-Driven DFIG During Asymmetrical Grid Voltage Dips

Performance Analysis of Double-Fed Induction Wind Generator Stator Inter-Turn Short Circuit Fault Based on ANSOFT

Dynamic Modeling and Improved Control of Dfig under Distorted Grid Voltage Conditions

Modeling and Analysis of DC-Link Dynamics in DFIG System with an Indicator Function

Harmonic Impedance Modeling of DFIG Considering Dead Time Effect of Rotor Side Converter

Optimized Control Strategy of Rotor Current for Doubly Fed Induction Generators During Symmetrical Voltage Fault