Abstract:Induction machines (IMs) are one of the main sources of mechanical power in many industrial processes, especially squirrel cage IMs (SCIMs), due to their robustness and reliability. Their sudden stoppage due to undetected faults may cause costly production breakdowns. One of the most frequent types of faults are cage faults (bar and end ring segment breakages), especially in motors that directly drive high-inertia loads (such as fans), in motors with frequent starts and stops, and in case of poorly manufactured cage windings. A continuous monitoring of IMs is needed to reduce this risk, integrated in plant-wide condition based maintenance (CBM) systems. Diverse diagnostic techniques have been proposed in the technical literature, either data-based, detecting fault-characteristic perturbations in the data collected from the IM, and model-based, observing the differences between the data collected from the actual IM and from its digital twin model. In both cases, fast and accurate IM models are needed to develop and optimize the fault diagnosis techniques. On the one hand, the finite elements approach can provide highly accurate models, but its computational cost and processing requirements are very high to be used in on-line fault diagnostic systems. On the other hand, analytical models can be much faster, but they can be very complex in case of highly asymmetrical machines, such as IMs with multiple cage faults. In this work, a new method is proposed for the analytical modelling of IMs with asymmetrical cage windings using a tensor based approach, which greatly reduces this complexity by applying routine tensor algebra to obtain the parameters of the faulty IM model from the healthy one. This winding tensor approach is explained theoretically and validated with the diagnosis of a commercial IM with multiple cage faults.

Simulation and Analysis of Squirrel Cage Induction Machines under Rotor Internal Faults

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Research on the Effect of Rotor Broken Bar Position on Induction Machine

Calculation of the main parameters of induction machines under rotor winding faults

An analytical model for squirrel cage induction machine with broken rotor bars derived based on the multiple coupled circuit theory and the winding function approach

Induction Motor Rotor Fault Diagnosis Method Based on Double PQ Transformation

Modeling and Analysis of Rotor Current of DFIG with Rotor Chopper Circuit Operative Condition During Three-Phase Symmetric Faults

Quantitative Broken Rotor Bar Fault Detection for Closed-Loop Controlled Induction Motors

Rotor Faults Diagnosis for Induction Motors Considering Effects of the Load and Inertia

Rotor Broken-Bar Fault Diagnosis of Induction Motor Based on HHT of the Startup Electromagnetic Torque

Rotor Broken Bar Fault Diagnosis for Induction Motors Based on Double PQ Transformation

Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction Motors Based on Torque Current

Diagnosis of Broken Rotor Bar Fault in Open- and Closed-Loop Controlled Wye-Connected Induction Motors Using Zero-Sequence Voltage

Analytical Model of Induction Machines with Multiple Cage Faults Using the Winding Tensor Approach

Harmonic Model and Remedy Strategy of Multiphase PM Motor under Open-Circuit Fault

Modeling of Interturn Short Fault in Interior Permanent Magnet Synchronous Motors with Multistrand Windings

PQ Transformation and Rotor Fault Diagnosis for Large Induction Motors

Study of Induction Motor Inter-Turn Fault Part I: Development of Fault Models with Distorted Flux Representation

Fault States and Simulation Analysis of a Cracked Rotor with Bearing Clearances

Support Vector Machine Used To Diagnose The Fault Of Rotor Broken Bars Of Induction Motors

Stator Current Model for Detecting Rolling Bearing Faults in Induction Motors Using Magnetic Equivalent Circuits