Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Calculation of the main parameters of induction machines under rotor winding faults

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

Research on the Effect of Rotor Broken Bar Position on Induction Machine

Rotor Faults Diagnosis for Induction Motors Considering Effects of the Load and Inertia

Parameters Estimation for Multiphase Induction Machine with Concentrated Windings Through Finite Element Method

Rotor Broken-Bar Fault Diagnosis of Induction Motor Based on HHT of the Startup Electromagnetic Torque

Online Identification Methodology of Field Winding Short Circuit Fault of Turbogenerator

Diagnostic Method of Induction Motor Stator Winding Interturn Short Circuit Fault Based on the Feature Impedance

Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction Motors Based on Torque Current

Simulation and Analysis of Squirrel Cage Induction Machines under Rotor Internal Faults

PQ Transformation and Rotor Fault Diagnosis for Large Induction Motors

Characteristics Analysis and Measurement of Inverter-Fed Induction Motors for Stator and Rotor Fault Detection

BROKEN ROTOR BARS FAULT DIAGNOSIS OF INDUCTION MACHINES BASED ON WAVELET TRANSFORMATION OF ELECTROMAGNETIC TORQUE

Quantitative Broken Rotor Bar Fault Detection for Closed-Loop Controlled Induction Motors

Diagnosis of Stator Faults in Induction Motor Based on Zero Sequence Voltage after Switch-off

Steady-State Calculation And Online Monitoring Of Interturn Short Circuit Of Field Windings In Synchronous Machines

Calculation of the Multi-loop Inductances for Inter-turn Short Circuits of Field Windings in Non-salient Pole Synchronous Machines

Theoretical Analysis and Calculation Model of the Electromagnetic Torque of Nonsalient-Pole Synchronous Machines With Interturn Short Circuit in Field Windings

TRANSIENT CALCULATION OF STATOR'S INTERNAL FAULTS IN SYNCHRONOUS GENERATOR USING FEM COUPLED WITH MULTI-LOOP METHOD

Efficiency in the detection of three important faults in induction motors through external magnetic field