Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Analysis and Reduction of Inherent Shaft Voltage in Interior Permanent Magnet Synchronous Machines

Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines.

An Analytical Model of Unbalanced Magnetic Force in Fractional-Slot Surface-Mounted Permanent Magnet Machines

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

An Accurate No-Load Analytical Model of Flat Linear Permanent Magnet Synchronous Machine Accounting for End Effects

Solution of Permanent Magnet Synchronous Motors with Partition between Poles Halbach Magnet

Analytical Sub-Domain Model for Predicting Open-Circuit Field of Permanent Magnet Vernier Machine Accounting for Tooth Tips

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

Analysis and Reduction of Detent Force in Permanent Magnet Linear Synchronous Motor

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

Nonlinear Analytical Analysis of External Rotor Permanent Magnet Synchronous Motor

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

Overall Electrical Parameters Identification for IPMSMs Using Current Derivative to Avoid Rank Deficiency

Analytical prediction of electromagnetic performance of dual-stator consequent-pole PM machines based on subdomain model accounting for tooth-tips

Design Consideration of Fractional Slot Concentrated Winding Interior Permanent Magnet Synchronous Motor for EV and HEV Applications

Modulated Vibration Reduction Design for Integral-Slot Interior Permanent Magnet Synchronous Machines

Reduction of Shaft Voltage of IPMSM According to the Shape of the Novel Shield Ring

Prediction of Electromagnetic Performance for IPMSM Based on Improved Analytical Model Considering Saturation Effects

Influence of Salient Effect on Air-Gap Flux Density Distribution of Interior Permanent-Magnet Synchronous Machines