Localization of CuO, NiO, and Co3O4 sintering additives in dense proton-conducting perovskite ceramics based on BaSnO3

Dmitry Medvedev,George Starostin,Mariam Akopian,Gennady Vdovin,Inna Starostina

DOI: https://doi.org/10.26434/chemrxiv-2024-d33w4

2024-09-05

Abstract:Sintering additives have been widely employed to achieve good sinterability of barium-based proton-conducting perovskites (based on BaZrO3, BaCeO3, BaTiO3, BaHfO3, BaThO3, and BaSnO3). This is of particular importance for the fabrication of multilayered ceramic cells, in which the thin-film electrolyte layer can be primarily densified at relatively low sintering temperatures (1350–1500 °C). The introduction of sintering additives facilitates the fabrication of gas-tight ceramics; however, the precise nature of their localization and their effects on the functional properties remain uncertain and even questionable. In this study, we present a comprehensive characterization of ceramic materials based on Y-doped BaSnO3 prepared with the addition of three sintering additives (copper, cobalt, and nickel oxides) at 1 wt%. Although these introduced oxides belong to a group of compounds with similar physicochemical properties, each additive exerts a distinct influence on the microstructural and electrochemical properties of the ceramics owing to their own chemical localization features. These features are discussed in detail in the present work, providing useful information in the field of using sintering additives for the preparation of oxide ceramics for high-temperature applications.

Chemistry

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to improve the sintering performance of BaSnO₃ - based proton - conductive perovskite ceramics by adding sintering aids in high - temperature applications, and at the same time explore the location of these sintering aids in the ceramic microstructure and their influence on electrochemical performance.

Specifically, the research focuses on the following points:

1. **Selection and effect of sintering aids**: The paper selects CuO, NiO and Co₃O₄ as sintering aids to study their influence on the sintering performance of BaSnO₃ - based ceramics. These aids can significantly reduce the sintering temperature, thereby increasing the density of the material.

2. **Location of sintering aids**: The specific positions of these sintering aids in the ceramic microstructure are studied to understand how they affect the microstructure and electrochemical performance of the material. Through energy - dispersive X - ray spectroscopy (EDX) analysis and scanning electron microscopy (SEM) observation, the researchers determined the distribution of sintering aids in the ceramics.

3. **Influence on electrochemical performance**: The influence of different sintering aids on the conductivity of ceramics is explored. Although sintering aids can increase the density of the material, they may also react with the electrolyte material to form phases with low conductivity, thus affecting the electrochemical performance of the material.

4. **Microstructural characteristics**: Through SEM images and particle size distribution analysis, the influence of different sintering aids on the microstructure of ceramics is described in detail. The study found that after adding sintering aids, the porosity of ceramics is significantly reduced, but different aids have different effects on grain growth.

In summary, this paper aims to reveal the specific influence of sintering aids on the microstructure and electrochemical performance of BaSnO₃ - based ceramics while improving their sintering performance through systematic research, providing a scientific basis for material design in high - temperature applications.