Abstract:The shear characteristics of calcareous sand, a typical deposit in the South China Sea, could significantly influence the safety and stability of marine structures. Previous studies showed that many factors, such as temperature and surface roughness, could affect the mobilized shear strength between the calcareous sand and steel surface. Therefore, studies on the shear behaviors of the steel-sand interface under various thermal conditions are necessary. In this study, a new multifunctional sediment shear system has been developed and employed to investigate the shear performance. For this purpose, steel plates with different surface roughness were tested under various normal stress values, shear displacement rates and temperatures. Shear strength and deformation were analyzed using test data to reveal the relationships between several factors and the shear strength of the steel-sand interface. Results from test demonstrate that the interfacial shear strength on rough steel interfaces will be 1.45–3.15 times higher than that on the smooth steel interface. Besides, the shear strength of the interface rises significantly with the roughness of the steel plate. The peak friction angle increases rapidly at the start and then tends to stabilize with the increase of normalized roughness. The interfacial shear strength could be enhanced in low-temperature environments but would reduce in high-temperature environments, e.g. the energy pile, particularly under low normal stress. The shear displacement rate also has a positive effect on the interface shear strength for most cases in this study. Finally, a new nonlinear function is proposed to describe the peak friction angle ratio of foundation interface to consider the effect of temperature and shear displacement rate reasonably.

Experimental and DEM Study on Shear Properties of Steel Pipe–Soil Interface

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Sand-Steel Interface Behaviour Under Large-Displacement And Cyclic Shear

Visualized direct shear test of the interface between gravelly sand and concrete pipe

An Experimental Study on Frictional Properties of Concrete Pipe–Soil Interface

Experimental Study of Interface Shearing between Calcareous Sand and Steel Plate Considering Surface Roughness and Particle Size

Experimental Study of Cyclic Shear Stiffness and Damping Ratio of Carbonate Sand-Steel Interface

Study on Cyclic Shear Properties of Siliceous Sand–Steel Interface under Different Normal Loading Conditions

Experimental research on reinforcement-soil interface stiffness and damping ratio under cyclic shearing

Experimental Investigation into Cyclic Shear Behaviors in the Interface Between Steel and Crushed Mudstone Particles

Experimental Study on the Shear Mechanical Properties of the Cemented Soil–concrete Interface

Analysis of Cyclic Shear Stress-Displacement Mechanical Properties of Silt-Steel Interface in the Yellow River Delta

Monotonic Behavior of Interface Shear Between Carbonate Sands and Steel

Experimental study of interface performance between calcareous sand and steel pile with different surface roughness and temperatures

Shear Band Between Steel and Carbonate Sand Under Monotonic and Cyclic Loading

Cyclic behavior of interface shear between carbonate sand and steel

Research on Shear Behavior of Sand–Structure Interface Based on Monotonic and Cyclic Tests

Dynamic Shear Behavior of Interface for Clay Reinforced with Geogrid Encapsulated in Thin Layers of Sand

Effect of particle gradation on static and dynamic direct shear properties of geogrid-sand interface

Experimental Investigation on the Cyclic Shear Mechanical Characteristics and Dynamic Response of a Steel–Silt Interface in the Yellow River Delta

Analyzing cyclic shear behavior at the sand–rough concrete interface: An experimental and DEM study across varying displacement amplitudes