Abstract:The interaction between soil and structure is a research hotspot in ocean engineering, and the shear performance of interfaces is an essential factor affecting the bearing capacity of offshore structures. Taking the Yellow River Underwater Delta as the research area, the Softening/Hardening damage model of the silt–steel interface and the determination method of model parameters are proposed based on the statistical damage theory. Through the interface monotonic shear test under the conditions of different normal stress, roughness and water content, the shear mechanical properties and volumetric deformation laws on the silt–steel interface are analyzed, and the damage model parameters are obtained. Finally, a FRIC subroutine for the damage model was developed based on ABAQUS. The research results indicate the following: (1) The interface between silt and steel exhibits two characteristics, softening/hardening and shear shrinkage/expansion, under different conditions. Roughness significantly impacts interfacial cohesion, while water content mainly affects the internal friction angle. (2) The softening model based on the classic rock damage model can better simulate the stress–strain relationship of the silt–steel interface under high normal stress and low water content. In contrast, the hardening model based on the classic hyperbola model can better simulate the stress–strain relationship under low normal stress and high water content. The calculated results of the softening/hardening model agree with the experimental results, and the model has 7 parameters. (3) The developed FRIC subroutine can effectively simulate the nonlinear mechanical behavior of the interface between silt and steel. The research results provide a reference for exploring the stability analysis of offshore structures considering interface weakening effects.

Analysis of Cyclic Shear Stress-Displacement Mechanical Properties of Silt-Steel Interface in the Yellow River Delta

Experimental Investigation on the Cyclic Shear Mechanical Characteristics and Dynamic Response of a Steel–Silt Interface in the Yellow River Delta

Lateral Cyclic Pile–soil Interaction Studies on a Rigid Model Monopile

Experimental Investigation into Cyclic Shear Behaviors in the Interface Between Steel and Crushed Mudstone Particles

Sand-Steel Interface Behaviour Under Large-Displacement And Cyclic Shear

Study on Cyclic Shear Properties of Siliceous Sand–Steel Interface under Different Normal Loading Conditions

Investigation on the cyclic shear properties of steel-crushed red mudstone particles interface

Softening/Hardening Damage Model and Numerical Implementation of Seabed Silt-Steel Interface in Yellow River Underwater Delta

Strength and Deformation Characteristics of Compacted Silt from the Lower Reaches of the Yellow River of China under Monotonic and Repeated Loading

Experimental Study of Cyclic Shear Stiffness and Damping Ratio of Carbonate Sand-Steel Interface

Experimental research on reinforcement-soil interface stiffness and damping ratio under cyclic shearing

Effects of the soil water content and relative roughness on the shear strength of silt and steel plate interface

Macroscopic behaviour and mesoscopic mechanism of shear strength characteristics of pile-soil interface under cyclic loading

Effect of Drained Static Shear on Cyclic Deformation Behavior of K-0-consolidated Sand

Cyclic behavior of interface shear between carbonate sand and steel

Undrained cyclic shear strength and stiffness degradation of overconsolidated soft marine clay in simple shear tests

Shear Band Between Steel and Carbonate Sand Under Monotonic and Cyclic Loading

Factors Influencing Critical Shear Stress of Silty Sediment Seabed in Yellow River

Cyclic Triaxial Test Study of Huanghua Harbor'Silt under Ocean Wave Loading

Experimental Study on the Shear Mechanical Properties of the Cemented Soil–concrete Interface

Effect of Normal Stress on Cyclic Simple-Shear Behavior of Gravel-Structure Interface