Abstract:The tetraethyl orthosilicate is introduced into CZTSSe precursor solution as a source of silicon to partially substitute Sn with Si for fabrication of CZTSSe device, giving rise to favorable functions in terms of passivating SnZn defects and optimizing energy level alignment. Consequently, the CZTSSe device with 7% Si substitution acquires a PCE of 13.02% due to the enhancement of Voc. The SnZn defect passivation and heterojunction interface energetics‐modification are crucial for further improvement of open‐circuit voltage (Voc) and efficiency of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. Herein, a simple but effective cation substitution strategy is reported to promote the performance of CZTSSe devices by simultaneously modifying the absorber and heterojunction interface. This is achieved by introducing the organic silicon salt C8H20O4Si into CZTSSe precursor solution as a source of silicon to partially substitute Sn with Si. Systematic studies reveal that there are two mechanisms synergistically contributing to the increase of efficiency: 1) This strategy can passivate the undesired SnZn defect in CZTSSe absorber more efficiently, leading to at least one order of magnitude lower SnZn defect density and beneficial carrier transport properties; 2) After Si incorporation, the conduction band minimum of the CZTSSe is upshifted, thus enlarging the bandgap, which ultimately optimizes the energy level structure at the CdS/CZTSSe interface and reduces interfacial energy loss by decreasing the carrier transport barrier. Consequently, the CZTSSe device with 7% Si substitution delivers a satisfactory efficiency of 13.02% owing to an increase in Voc. It is hoped the Si substitution strategy reported here can provide inspiration for developing advanced CZTSSe devices with broad application prospects.

Viable Strategy for Suppressing Antisite Defects and Band Tailing States in Solution-Processed Kesterite Solar Cells Via IIIA Incorporation: Case of Aluminum

Formation of Alloyed Cu2CoxZn1-xSn(S,Se)4 Absorption Layer and Its Application in Solar Cells.

Formation of Alloyed Cu2Cox Zn1-x Sn(S,Se)4 Absorption Layer and Its Application in Solar Cells

Crystallization mechanism and defect passivation of Cu2ZnSn(S,Se)4 thin film solar cells via in situ potassium doping

Effects of CuAlO2 on the heterojunction interface and performance of Cu2ZnSn(S,Se)4 thin-film solar cells

Passivation of Grain Boundaries and Defects in CZTSSe Solar Cells by In Situ Na Doping

Substitution of Ag for Cu in Cu2ZnSn(S,Se)4: Toward Wide Band Gap Absorbers with Low Antisite Defects for Thin Film Solar Cells

High Efficiency Cu2ZnSn(S,Se)4 Solar Cells with Shallow LiZn Acceptor Defects Enabled by Solution‐Based Li Post‐Deposition Treatment

High Efficiency Cu 2 ZnSn(S,Se) 4 Solar Cells with Shallow Li Zn Acceptor Defects Enabled by Solution‐Based Li Post‐Deposition Treatment

Insight into the Role of Rb Doping for Highly Efficient Kesterite Cu2ZnSn(S,Se)4 Solar Cells

Optimizing the properties of Cu2ZnSn(S,Se)4 solar cells via cationic substitution with trace Ca

Multinary Alloying Suppresses Defect Formation in Emerging Inorganic Solar Cells

Multinary alloying for facilitated cation exchange and suppressed defect formation in kesterite solar cells with above 14% certified efficiency

Defect Engineering in Earth‐Abundant Cu2ZnSn(S,Se)4 Photovoltaic Materials Via Ga3+‐Doping for over 12% Efficient Solar Cells

In-doping collaboratively controlling back interface and bulk defects to achieve efficient flexible CZTSSe solar cells

Efficiency Enhancement of Cu2ZnSn(S,Se)4 Solar Cells via Alkali Metals Doping

Efficient kesterite Ag-alloyed Cu 2 ZnSn(S,Se) 4 thin film solar cells with a front Ag grading distribution enabled by ZnO insert layer

Defect Regulation by Palladium Incorporation towards Grain Boundaries of Kesterite solar cells

Structural, Electronic and Defect Properties of Cu 2 ZnSn(S,Se) 4 Alloys

Improvement of Power Conversion Efficiency of Cu <sub>2</sub>znsn(s,se) <sub>4</sub> Solar Cells by Al Doped CdS

Passivating SnZn Defect and Optimizing Energy Level Alignment via Organic Silicon Salt Incorporation toward Efficient Solution‐Processed CZTSSe Solar Cells