Abstract:The adsorption and desorption process of selenium (Se) clusters, especially small molecule Se3 and Se4, on graphite enhance the diffusion and reaction activity of traditional Se particles, thereby improving the chemical environment for grain growth, optimizing the film crystallinity, and passivating defects, and finally making the device efficiency up to 14.5% with a VOC of 553.1 mV. Insufficient selenization and uneven distribution of elements caused by the poor diffusion and reaction activity of selenium clusters is one of the main issues limiting the efficiency of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. Here, this work designs a simple and feasible strategy to improve the activity of selenium (Se) by implementing high‐temperature treatment on graphite boxes loaded with Se pellets. The rapid adsorption/desorption characteristics of graphite on active gaseous small‐molecule selenium have successfully introduced hyperactive Se4, Se3, and Se2 into the selenization process. The results indicate that the adsorbed non‐toxic gaseous active Se3 and Se4 can quickly and uniformly diffuse into the precursor film at low temperatures, thereby inducing nucleation and grain growth at both surface and back interface simultaneously, which inhibits the upward migration and aggregation of cations, especially Cu, and promotes the homogenization of elements. The overall relatively Cu‐poor chemical environment suppresses the formation of CuZn defects and [2CuZn+SnZn] defect clusters, and also promotes the generation of favorable VCu. The band tail states and non‐radiative recombination are then optimized. Finally, the CZTSSe solar cells achieve a power conversion efficiency (PCE) of 14.5%, with VOC/VOCSQ of 67% being one of the highest in the literature.

Crystallization mechanism and defect passivation of Cu2ZnSn(S,Se)4 thin film solar cells via in situ potassium doping

Passivation of Grain Boundaries and Defects in CZTSSe Solar Cells by In Situ Na Doping

Formation of Alloyed Cu2Cox Zn1-x Sn(S,Se)4 Absorption Layer and Its Application in Solar Cells

Formation of Alloyed Cu2CoxZn1-xSn(S,Se)4 Absorption Layer and Its Application in Solar Cells.

Insight into the Role of Rb Doping for Highly Efficient Kesterite Cu2ZnSn(S,Se)4 Solar Cells

Efficiency Enhancement of Cu2ZnSn(S,Se)4 Solar Cells via Alkali Metals Doping

Synergistic Crystallization Modulation and Defects Passivation in Kesterite via Anion-Coordinate Precursor Engineering for Efficient Solar Cells

Sb Doping Strategy to Promote Growth and Suppress Defects in Solution-Processed CZTSSe Solar Cells for Improved Optoelectronic Performance

Mechanism of enhanced power conversion efficiency of Cu2ZnSn(S, Se)4 solar cell by cadmium surface diffusion doping

Efficiency Enhancement of CZTSe Solar Cells Based on In-Situ K-doped Precursor

High Efficiency Cu2ZnSn(S,Se)4 Solar Cells with Shallow LiZn Acceptor Defects Enabled by Solution‐Based Li Post‐Deposition Treatment

Defect Engineering in Earth‐Abundant Cu2ZnSn(S,Se)4 Photovoltaic Materials Via Ga3+‐Doping for over 12% Efficient Solar Cells

High Efficiency Cu 2 ZnSn(S,Se) 4 Solar Cells with Shallow Li Zn Acceptor Defects Enabled by Solution‐Based Li Post‐Deposition Treatment

Structural, Electronic and Defect Properties of Cu 2 ZnSn(S,Se) 4 Alloys

Passivation of Deep‐Level Defects through Chemical Environment Regulation for Efficient CZTSSe Solar Cells Based on Active Selenium Adsorption–Desorption Process

Improvement of Power Conversion Efficiency of Cu <sub>2</sub>znsn(s,se) <sub>4</sub> Solar Cells by Al Doped CdS

Se as hetero-nucleation seeds reinforcing intermetallic diffusion for improved electrodeposition-processed CZTS solar cells

Structural, Electronic and Defect Properties of Cu<sub>2</sub>ZnSn(S,Se)<sub>4</sub> Alloys

Defect Passivation in Cu2ZnSnSe4 Thin-Film Solar Cells by Novel Sodium Doping

Doping Behavior of Zn in CdS and Its Effect on the Power Conversion Efficiency of the Cu2ZnSn(S, Se)4 Solar Cell

Optimizing the properties of Cu2ZnSn(S,Se)4 solar cells via cationic substitution with trace Ca