Abstract:The performance of telescopes, important components of space interferometry systems, directly affects the accuracy of gravitational wave signals. Space gravitational wave telescopes typically employ an off-axis four-mirror system. When aligned, this system not only has multiple misalignments, but also exhibits interrelated aberrations from various misalignments. These characteristics may lead to difficult alignment of the telescope system as well as significant deviation between the position of the telescope after alignment and the ideal position. To address the aforementioned issues, first, a sensitivity matrix equation was established between the misalignment of optical components and the Fringe Zernike coefficients. Based on the sensitivity matrix equation, a damping least-squares evaluation function was constructed to reduce the significant deviation between the aligned and ideal positions. Second, a typical optical system of a space gravitational wave telescope was designed, and the sensitivity matrix was calculated. The relationship between the wavefront distortions caused by misalignments in each optical component was examined. To simplify telescope installation, a strategy using secondary mirrors as compensatory elements was proposed. Finally, to verify the effectiveness of the scheme, 200 sets of tolerance files were randomly generated. Based on the evaluation function of the damping least-squares method, a reasonable damping factor was set to limit the solution range of the misalignment amount, which enabled calculating the secondary mirror compensation amount. Experimental results indicate that after aligning the 200 random telescope files, the root-mean-square wavefront error was reduced to less than 0.0030λ, and the maximum error between the magnification after alignment and the ideal position magnification was only 0.57%, which confirms the feasibility of this alignment scheme.

Multimodal Adaptive Alignment Technology for Off-Axis Optical Systems Based on Interferogram Guidance

Computer Aided Alignment of 20X Schwarzschild Projection Optics

Method for Active Spatial Alignment and Stabilization of Laser Beams in Multi-Beam Systems

Misalignment Correction for Free-Form Surface in Non-Null Interferometric Testing

Optimization of Longitudinal Alignment of an 4<i>f</i> System in a Compact Vectorial Optical-Field Generator Based on a High-Resolution Liquid Crystal Spatial Light Modulator

Influences of Misalignment Errors of Optical Components in an Orthogonal Two-Axis Lloyd's Mirror Interferometer.

Dual-mode on-machine metrology for SPDT tool alignment

Practical and Accurate Method for Aspheric Misalignment Aberrations Calibration in Non-Null Interferometric Testing

Optical alignment technology for 1-meter accurate infrared magnetic system telescope

Alignment of three mirror anastigmat telescopes using a multilayered stochastic parallel gradient descent algorithm

Simulation alignment of optical system for space gravitational wave telescope

Method for establishing computer-aided alignment model based on optical component surface shape

An On-Chip Calibration Method for Optical Phased Array with No Blind Spot in the Steering Range

OPTICAL SYSTEM MISALIGNMENT SOLUTION-BASED METHOD FOR EVALUATING STABILITY OF OPTICAL-MECHANICAL STRUCTURE

Automatic Alignment Between Two Optical Fiber Collimators

Optical tweezer generation using automated alignment and adaptive optics

Analysis of Coordinates Decoupling of Multi-Dimensional Precision Optical Adjusting Frame in Optical Alignment

An Alignment of Primary and Secondary Mirrors for Optical System in Large Telescopic

Active alignment of complex perturbed pupil-offset off-axis telescopes using the extension of nodal aberration theory

Quality Optimization and Control Technology for A Full Field-Of-View Imaging Surface Using A Stationary Phase Method and an Ambiguity Function Method

Off-axis telescope misalignment correction based on defocus spot moment features