Abstract:The performance of telescopes, important components of space interferometry systems, directly affects the accuracy of gravitational wave signals. Space gravitational wave telescopes typically employ an off-axis four-mirror system. When aligned, this system not only has multiple misalignments, but also exhibits interrelated aberrations from various misalignments. These characteristics may lead to difficult alignment of the telescope system as well as significant deviation between the position of the telescope after alignment and the ideal position. To address the aforementioned issues, first, a sensitivity matrix equation was established between the misalignment of optical components and the Fringe Zernike coefficients. Based on the sensitivity matrix equation, a damping least-squares evaluation function was constructed to reduce the significant deviation between the aligned and ideal positions. Second, a typical optical system of a space gravitational wave telescope was designed, and the sensitivity matrix was calculated. The relationship between the wavefront distortions caused by misalignments in each optical component was examined. To simplify telescope installation, a strategy using secondary mirrors as compensatory elements was proposed. Finally, to verify the effectiveness of the scheme, 200 sets of tolerance files were randomly generated. Based on the evaluation function of the damping least-squares method, a reasonable damping factor was set to limit the solution range of the misalignment amount, which enabled calculating the secondary mirror compensation amount. Experimental results indicate that after aligning the 200 random telescope files, the root-mean-square wavefront error was reduced to less than 0.0030λ, and the maximum error between the magnification after alignment and the ideal position magnification was only 0.57%, which confirms the feasibility of this alignment scheme.

An Alignment of Primary and Secondary Mirrors for Optical System in Large Telescopic

Subaperture alignment technique for large aperture mirrors

Analysis on mirrors installation error of high-accuracy long focal length measurement system

Computer-aided Alignment Method for a Four-Mirror Off-Axis Reflective Optical System

Simulation alignment of optical system for space gravitational wave telescope

Precise Alignment Method of Online Optical Testing for Large-Aperture Mirror Fabrication

Distortion Alignment Method for Center Shaft Supporting Large Aperture Mirror

An alignment method for the reflective zoom system by applying vector wavefront aberration theory

Computer-aided Alignment Method of Segmented Primary Mirror System

Assembly and adjustment method based on aberrations correction for telescope optical system

Research On Computer-Aided Alignment For An Afocal Off-Axis Optical System

Easy-aligned Off-Axis Three-Mirror System with Wide Field of View Using Freeform Surface Based on Integration of Primary and Tertiary Mirror.

Application of reverse optimization method in computer-aided alignment

Optical alignment technology for 1-meter accurate infrared magnetic system telescope

Post Optical Freeform Compensation Technique for Machining Errors of Large-Aperture Primary Mirror

Misalignment Correction Method of Space Optical System on Orbit

Measurement of Alignment Parameters in Spherical Segmented-Mirrors Using Novel Algorithm and Advanced Phase Unwrapping Method

Off-Axis Three-Mirror Anastigmatic System Alignment and Application Based on Principal Component Analysis

Design and Analysis of the Optical Structure for K Mirror in Astronomical Telescopes

Subaperture Stitching Testing for Fine Flat Mirrors with Large Apertures Using an Orthonormal Polynomial Fitting Algorithm

Integrated Primary and Tertiary Mirror Components from Common Base Line of Off-Axis TMA Space Camera