Abstract:Abstract Telescopes primarily transmit and receive laser beams over long distances as part of a gravitational wave interferometric measurement system. Due to factors such as optical design, fabrication, and alignment, the wavefront at the exit pupil of the telescope inevitably experiences distortion, resulting in wavefront aberrations that couple with pointing jitter to generate tilt-to-length (TTL) coupling noise. During the process of gravitational wave detection, the large distance between the primary and secondary mirrors and temperature fluctuations in space can cause significant axial misalignment between them. This results in a substantial displacement of the primary-secondary mirror system's primary focus along the axial direction, further degrading the wavefront at the exit pupil of the telescope. The TTL coupling noise caused in this scenario will affect the detection of gravitational waves, thus requiring the adjustment of the position of the three-four mirror system through the focusing system to minimize TTL coupling noise. In this paper, the model for TTL coupling noise was established using the first 36 orders of Zernike polynomials. The misalignment model of the primary-secondary mirror system was derived using geometric optics theory. The study investigates the influence of the telescope focusing system before and after focusing on the wavefront aberrations and TTL coupling noise at the exit pupil of the telescope. The analysis indicates that with a misalignment of 7.56 μm in the axial distance between the primary and secondary mirrors, the addition of a focusing system reduces the wavefront error at the exit pupil of the telescope from 0.0328 λ to 0.0046 λ. Furthermore, the maximum coupling noise between wavefront distortion and pointing jitter is reduced from 4 pm/Hz1/2 to 0.4 pm/Hz1/2. This provides valuable insights for the design of gravitational wave detection telescopes and the study of focusing systems.

Off-axis telescope misalignment correction based on defocus spot moment features

Misalignment Correction for Free-Form Surface in Non-Null Interferometric Testing

Influences of Misalignment Errors of Optical Components in an Orthogonal Two-Axis Lloyd's Mirror Interferometer.

Alignment Methods for Micron-Scale Surface Defects Automatic Evaluation of Large-Aperture Fine Optics

Stowing Distortion of Space Optical Tilt Mirror

Analysis on mirrors installation error of high-accuracy long focal length measurement system

The Distortion in Fixing the Swing Mirror Bracket of the Space Solar Telescope

Simulation alignment of optical system for space gravitational wave telescope

Modified Wavefront Sensing and Correction Methodology for Active Segment Mirror of Large Space Telescope

Location-grouping Algorithm Based on Limited Actuators Deformable Mirror for High Precision Wavefront Aberration Correction in Adaptive Optics System

Active alignment of complex perturbed pupil-offset off-axis telescopes using the extension of nodal aberration theory

Optical Pupil Shift Correction Method for Large Ground-Based Optical Telescopes

Optical alignment technology for 1-meter accurate infrared magnetic system telescope

An Alignment of Primary and Secondary Mirrors for Optical System in Large Telescopic

Error analysis on assembly and alignment of laser optical unit

High precision wavefront correction method in interferometer testing

Analysis of alignment requirements for off-axis resonant cavity based on coupling efficiency

Arbitrary field-of-view wavefront monitoring method based on an improved vision transformer network

Effect of the focusing system on measurements in gravitational wave detection telescope

Research on multi-optical axis online compensation alignment method for space environment simulation system

Optomechanical analysis of the mounting performance of large laser transport mirrors