Abstract:The performance of telescopes, important components of space interferometry systems, directly affects the accuracy of gravitational wave signals. Space gravitational wave telescopes typically employ an off-axis four-mirror system. When aligned, this system not only has multiple misalignments, but also exhibits interrelated aberrations from various misalignments. These characteristics may lead to difficult alignment of the telescope system as well as significant deviation between the position of the telescope after alignment and the ideal position. To address the aforementioned issues, first, a sensitivity matrix equation was established between the misalignment of optical components and the Fringe Zernike coefficients. Based on the sensitivity matrix equation, a damping least-squares evaluation function was constructed to reduce the significant deviation between the aligned and ideal positions. Second, a typical optical system of a space gravitational wave telescope was designed, and the sensitivity matrix was calculated. The relationship between the wavefront distortions caused by misalignments in each optical component was examined. To simplify telescope installation, a strategy using secondary mirrors as compensatory elements was proposed. Finally, to verify the effectiveness of the scheme, 200 sets of tolerance files were randomly generated. Based on the evaluation function of the damping least-squares method, a reasonable damping factor was set to limit the solution range of the misalignment amount, which enabled calculating the secondary mirror compensation amount. Experimental results indicate that after aligning the 200 random telescope files, the root-mean-square wavefront error was reduced to less than 0.0030λ, and the maximum error between the magnification after alignment and the ideal position magnification was only 0.57%, which confirms the feasibility of this alignment scheme.

Arbitrary field-of-view wavefront monitoring method based on an improved vision transformer network

A New Type Shack-Hartmann Wavefront Sensor Using Liquid Crystal Display

Monocentric Imaging System with Wide Field of View and High Resolution for Distant View Observation

High-Precision Attitude Angle Measuring System Based on Talbot Interferometry

Modified Wavefront Sensing and Correction Methodology for Active Segment Mirror of Large Space Telescope

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Efficient Wavefront Sensing for Space-Based Adaptive Optics

Recent Developments of Interferometric Wavefront Sensing

Off-axis telescope misalignment correction based on defocus spot moment features

Simulation alignment of optical system for space gravitational wave telescope

Quality Optimization and Control Technology for A Full Field-Of-View Imaging Surface Using A Stationary Phase Method and an Ambiguity Function Method

Field of view-independent detection of secondary mirror position errors in coaxial reflecting space telescopes using deep learning

Design of a Spaceborne, Compact, Off-Axis, Multi-Mirror Optical System Based on Freeform Surfaces

Low Spatio-temporal Frequency Wavefront Aberration Correction Method Based on a Movable Secondary Mirror

Telescope performance real-time monitoring based on machine learning

A Demonstration of Wavefront Sensing and Mirror Phasing from the Image Domain

An Optical System of Star Sensors with Accuracy Performance Varying with the Field of View

Research on Calibration Method of off-axis Closed-loop Detection System for Multi-target Spectral Telescope

Multi-line-of-sight Hartmann-Shack wavefront sensing based on image segmentation and K-means sorting

Integrated modeling of wavefront sensing and control for space telescopes utilizing active and adaptive optics

Research on accurate non-contact temperature measurement method for telescope mirror