Abstract:The performance of telescopes, important components of space interferometry systems, directly affects the accuracy of gravitational wave signals. Space gravitational wave telescopes typically employ an off-axis four-mirror system. When aligned, this system not only has multiple misalignments, but also exhibits interrelated aberrations from various misalignments. These characteristics may lead to difficult alignment of the telescope system as well as significant deviation between the position of the telescope after alignment and the ideal position. To address the aforementioned issues, first, a sensitivity matrix equation was established between the misalignment of optical components and the Fringe Zernike coefficients. Based on the sensitivity matrix equation, a damping least-squares evaluation function was constructed to reduce the significant deviation between the aligned and ideal positions. Second, a typical optical system of a space gravitational wave telescope was designed, and the sensitivity matrix was calculated. The relationship between the wavefront distortions caused by misalignments in each optical component was examined. To simplify telescope installation, a strategy using secondary mirrors as compensatory elements was proposed. Finally, to verify the effectiveness of the scheme, 200 sets of tolerance files were randomly generated. Based on the evaluation function of the damping least-squares method, a reasonable damping factor was set to limit the solution range of the misalignment amount, which enabled calculating the secondary mirror compensation amount. Experimental results indicate that after aligning the 200 random telescope files, the root-mean-square wavefront error was reduced to less than 0.0030λ, and the maximum error between the magnification after alignment and the ideal position magnification was only 0.57%, which confirms the feasibility of this alignment scheme.

Field of view-independent detection of secondary mirror position errors in coaxial reflecting space telescopes using deep learning

Deep learning based wavefront sensor for complex wavefront detection in adaptive optical microscopes.

An Efficient Algorithm for Infrared Earth Sensor with a Large Field of View.

A Deep Learning Based Mutual Coupling Correction and DOA Estimation Algorithm

A Design of Algorithm for Excimer Laser Coaxial Observation Automatic Tracking Processing System

Arbitrary field-of-view wavefront monitoring method based on an improved vision transformer network

Machine Learning for Improving Stellar Image-based Alignment in Wide-field Telescopes

Telescope performance real-time monitoring based on machine learning

Off-axis telescope misalignment correction based on defocus spot moment features

Modified Wavefront Sensing and Correction Methodology for Active Segment Mirror of Large Space Telescope

Method for detection of primary mirror figure deformation in space

Two-mirror aerial mapping camera design with a tilted-aplanatic secondary mirror for image motion compensation

Deep Neural Network closed-loop with raw data for optical resident space object detection

Large Range of a High-Precision, Independent, Sub-Mirror Three-Dimensional Co-Phase Error Sensing and Correction Method via a Mask and Population Algorithm

Research on co-phasing detection of segmented mirror based on convolutioned neural networks

Perception of Misalignment States for Sky Survey Telescopes with the Digital Twin and the Deep Neural Networks

Simulation alignment of optical system for space gravitational wave telescope

High-Accuracy Angle Detection for the Ultrawide FOV Acquisition Scheme in Free-Space Optical Links

High-precision Domain Adaptive Detection Method for Non-cooperative Spacecraft Based on Optical Sensor Data

Integrated Analysis of Line-Of-Sight Stability of Off-Axis Three-Mirror Optical System

High-Precision Automatic Calibration Modeling of Point Light Source Tracking Systems