Abstract:The performance of telescopes, important components of space interferometry systems, directly affects the accuracy of gravitational wave signals. Space gravitational wave telescopes typically employ an off-axis four-mirror system. When aligned, this system not only has multiple misalignments, but also exhibits interrelated aberrations from various misalignments. These characteristics may lead to difficult alignment of the telescope system as well as significant deviation between the position of the telescope after alignment and the ideal position. To address the aforementioned issues, first, a sensitivity matrix equation was established between the misalignment of optical components and the Fringe Zernike coefficients. Based on the sensitivity matrix equation, a damping least-squares evaluation function was constructed to reduce the significant deviation between the aligned and ideal positions. Second, a typical optical system of a space gravitational wave telescope was designed, and the sensitivity matrix was calculated. The relationship between the wavefront distortions caused by misalignments in each optical component was examined. To simplify telescope installation, a strategy using secondary mirrors as compensatory elements was proposed. Finally, to verify the effectiveness of the scheme, 200 sets of tolerance files were randomly generated. Based on the evaluation function of the damping least-squares method, a reasonable damping factor was set to limit the solution range of the misalignment amount, which enabled calculating the secondary mirror compensation amount. Experimental results indicate that after aligning the 200 random telescope files, the root-mean-square wavefront error was reduced to less than 0.0030λ, and the maximum error between the magnification after alignment and the ideal position magnification was only 0.57%, which confirms the feasibility of this alignment scheme.

Integrated Analysis of Line-Of-Sight Stability of Off-Axis Three-Mirror Optical System

Method for enhancing stability in multi-beam microscopy

Stowing Distortion of Space Optical Tilt Mirror

FINITE ELEMENT ANALYSIS OF THE DEFORMATION AND STRESS IN THE OPTICAL ELEMENT UNDER COMPLEX OPERATION CONDITIONS

Analysis of LOS Measurement Error for Space-Based Optical Sensor

Analysis Method of Beam Pointing Stability Based on Optical Transmission Matrix

Research on the Design and Alignment Method of the Optic-Mechanical System of an Ultra-Compact Fully Freeform Space Camera

On-orbit thermal deformation prediction for a high-resolution satellite camera

OPTICAL SYSTEM MISALIGNMENT SOLUTION-BASED METHOD FOR EVALUATING STABILITY OF OPTICAL-MECHANICAL STRUCTURE

Design And Analysis Of Structure Of Large Aperture Three-Mirror Off-Axis Optical System

A simulation imaging method for actual optical system and results analysis

Integrated modeling and analysis of the microvibration effects on the line-of-sight stability for the space laser communication terminal

Simulation alignment of optical system for space gravitational wave telescope

Study on Optical Image Stabilizing Method Based on the Technique of Deformable Mirror

High-Accuracy Real-Time Attitude Determination and Imagery Positioning System for Satellite-Based Remote Sensing

Thermal Stability Optimization of the Luojia 1-01 Nighttime Light Remote-Sensing Camera's Principal Distance

Off-axis Optical Bench Design for Next Generation Gravity Mission

An Image Stabilization Optical System Using Deformable Freeform Mirrors

Design and Analysis of the Optical Structure for K Mirror in Astronomical Telescopes

Analysis of Coordinates Decoupling of Multi-Dimensional Precision Optical Adjusting Frame in Optical Alignment

Analysis on the assembly stability and alignment of optical unit