Abstract:A new strategy; cation and anion dual gradient, is proposed and successfully constructed at the surface of LiCoO2 to minimize the highly oxidized Co4+ and O− species when charged to high potentials, which not only suppresses the relevant surface side reactions, but also affected the Li+ diffusion kinetics through the induced spinel‐like surface structure, making LiCoO2 exhibit excellent cycling stability and rate capability at the high cutoff voltage of 4.6 V, further validated in the 4.55 V pouch full cell (equivalent to 4.6 V vs Li/Li+).LiCoO2 (LCO) is the most successful cathode material for commercial lithium‐ion batteries. Cycling LCO to high potentials up to 4.5 V or even 4.6 V can significantly elevate the capacity but cause structural degradation due to the serious surface side reaction between the highly oxidized Co4+ and O− species with organic electrolytes. To tackle this concern, a new strategy, constructing cation and anion dual gradients at the surface of LCO (DG‐LCO), is proposed. Specifically, the electrochemically inactive cation and anion are selected to substitute Co3+ and O2− at the surface in a gradated manner, thus minimizing the highly oxidized Co4+ and O− species at high potentials and suppressing the induced surface side reactions. Unexpectedly, this dual gradient design leads to a spinel‐like surface structure coherently with bulk layered structure, which facilitates Li+ diffusion kinetics. Thus, DG‐LCO achieves high capacity and excellent cycling stability at 4.6 V (≈216 mA h g−1 at 0.1 C, a capacity retention of 88.6% after 100 cycles in 1.8 A h pouch full cell at 1 C), as well as improved rate capability (≈140 mA h g−1 at 5 C). These studies provide useful guidelines for future design of cathode materials with long lifespan and high rate capability.

A Dual-Functional Synergetic Strategy Enhances the Interfacial and Structural Stability of LiCoO2 at High Voltage

Multi-Element Synergistic Doping Enhances High-Voltage Performance of LiCoO2 Via Stabilizing Internal and Surface Structures

Synthesis of co-doped high voltage lithium cobalt oxide with high rate electrochemical performance

A Novel Bifunctional Self‐Stabilized Strategy Enabling 4.6 V LiCoO2 with Excellent Long‐Term Cyclability and High‐Rate Capability

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

High-Entropy Surface Complex Stabilized LiCoO<sub>2</sub> Cathode

High‐Entropy Surface Complex Stabilized LiCoO2 Cathode

Nanoscale Control and Tri-Element Co-Doping of 4.6 V LiCoO2 with Excellent Rate Capability and Long-Cycling Stability for Lithium-Ion Batteries.

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

Surface Design with Cation and Anion Dual Gradient Stabilizes High-Voltage LiCoO<sub>2</sub>

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

The Synergetic Effects of Ru and Al Co‐Doping for Improved Cyclability of LiCoO2 at High Voltages

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Hybrid ion/electron interfacial regulation stabilizes the cobalt/oxygen redox of ultrahigh-voltage lithium cobalt oxide for fast-charging cyclability

Double function-layers construction strategy promotes the cycling stability of LiCoO2 under high temperature and high voltage

Suppress oxygen evolution of lithium-rich manganese-based cathode materials via an integrated strategy

Achieving structural stability of LiCoO2 at high-voltage by gadolinium decoration

High-entropy doping for high-voltage LiCoO 2 with enhanced electrochemical performances

Highly stable operation of LiCoO2 at cut-off ≥ 4.6 V enabled by synergistic structural and interfacial manipulation

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Synergistic effect of fluorinated solvent and Mg2+ enabling 4.6 V LiCoO2 performances