Abstract:As numerous impressive large-scale 3D printed concrete structures have been built with 3D concrete printing (3DCP) technology, more attention has been given to the automation, accuracy and reliability of this technology. The concept of Brain-Eyes-Hands Loop (BEH Loop) is defined for use in automatic construction, describing the relationships among design, evaluation, and construction. In this paper, an innovative continuous reinforcement method with fiber reinforced polymer (FRP) flexible textile and Engineered Cementitious Composite (ECC) is presented, that offers an effective solution for the lack of tensile reinforcement and corrosion of steel bars in 3D printed concrete structures. The reinforced 3D printed concrete walls were constructed, evaluated, and tested under quasi-static cyclic loading. By digital rebuilding and geometric evaluation, the printing quality of wall specimens was accessed and ensured. Based on the mechanical tests, the seismic performances of the wall specimens were obtained and found to be mainly bending failure. The proposed reinforcement method was demonstrated for delaying crushing and improving mechanical behaviors. The end column and smaller heightwidth ratio also showed much improvement in mechanical performance. Compared with the conventional cast concrete wall, the 3DCP wall specimens reinforced by the proposed reinforcement method showed better material utilization efficiency and mechanical properties. Therefore, the 3DCP structures reinforced with flexible FRP textile show great potential for the future use in fully automatic construction of large-scale complex architectures according to the frame of the BEH Loop.

Mechanical Properties of 3D Printed ECC Beams Reinforced with FRP Mesh

Flexural performance of 3D-printed composite beams with ECC and recycled fine aggregate concrete: Experimental and numerical analysis

Experimental and numerical study on the flexural behavior of 3D-printed composite beams with U-shaped ECC formwork

Mechanical behavior of FRP sheets reinforced 3D elements printed with cementitious materials

Flexural behaviour of high strength engineered cementitious composites (ECC)-reinforced concrete composite beams

Crack propagation and failure mechanism of 3D printing engineered cementitious composites (3DP-ECC) under bending loads

3D printing of FRP grid and bar reinforcement for reinforced concrete plates: Development and effectiveness

Experimental Investigation on Flexural Capacity of Reinforced Concrete Beams Strengthened with 3D-Fiberglass, CFRP and GFRP

Shear Behaviour of RC Beams Strengthened using CFRP Grid-ECC/PMM Matrix Composites: An Experimental and Numerical Investigation

Experimental investigation on flexural performance of concrete beams strengthened with SMA-GFRP-ECC smart composite materials

3D FRP Reinforcement Systems for Concrete Beams: Innovation towards High Performance Concrete Structures

Mechanical properties of a 3D-printed SFRC beam with steel fiber distribution adaptive to tensile stress

Relationship between microstructure and strain-hardening behaviour of 3D printed engineered cementitious composites

Behavior of 3D-printed HPC plates with FRP grid reinforcement under bending

3D Printed Concrete Walls Reinforced with Flexible FRP Textile: Automatic Construction, Digital Rebuilding, and Seismic Performance

A Multiscale Model for Quantifying Fiber Orientation Effects on the Tensile Properties of 3d Printed Engineered Cementitious Composites (3dp-Ecc)

Experimental investigation of corrosion-damaged RC beams strengthened in flexure with FRP grid-reinforced ECC matrix composites

Experimental and theoretical investigations on flexural performance of hybrid fiber reinforced ECC-NC composite beams

Flexural Performance of Layered ECC-concrete Composite Beam

Performance of 3D-Printed Beams and Slabs Using Self-Sensing Cementitious Composites and DIC Method

Experimental and theoretical studies on the shear resistance of reinforced engineered cementitious composite beams with GFRP rebars and natural fibers