Abstract:To promote the engineering application of recycled aggregate for concrete production with good adaptability and economic efficiency, this paper performed a campaign to investigate the flexural performance of steel fiber reinforced composite-recycled aggregate concrete (SFR-CRAC) beams matched with 500 MPa longitudinal rebars. The composite-recycled aggregate has features of the full use recycled fine aggregate and small particle recycled coarse aggregate, and the continuous grading of coarse aggregate ensured by admixing the large particle natural aggregate about 35% to 45% in mass of total coarse aggregate. The properties of SFR-CRAC have been comprehensively improved by using steel fibers. With a varying volume fraction of steel fiber from 0% to 2.0%, 10 beam specimens were produced. The flexural behaviors of the beams during the complete loading procedure were experimentally studied under a four-point bending test. Of which the concrete strain at mid-span section, the appearance of cracks, the crack distribution and crack width, the mid-span deflection, the tensile strain of longitudinal rebars, and the failure patterns of the beams were measured in detail. Results indicated that the assumption of plane cross-section held true approximately, the 500 MPa longitudinal rebars worked at a high stress level within the limit width of cracks on reinforced SFR-CRAC beams at the normal serviceability, and the typical failure occurred with the yield of 500 MPa longitudinal rebars followed by the crushed SFR-CRAC in compression. The cracking resistance, the flexural capacity, and the flexural ductility of the beams increased with the volume fraction of steel fiber, while the crack width and mid-span deflection obviously decreased. Finally, by linking to those for conventional reinforced concrete beams, formulas are suggested for predicting the cracking moment, crack width, and flexural stiffness at normal serviceability, and the ultimate moment at bearing capacity of reinforced SFR-CRAC beams.

Flexural performance of 3D-printed composite beams with ECC and recycled fine aggregate concrete: Experimental and numerical analysis

Experimental and numerical study on the flexural behavior of 3D-printed composite beams with U-shaped ECC formwork

Flexural behaviour of high strength engineered cementitious composites (ECC)-reinforced concrete composite beams

Experimental and theoretical investigations on flexural performance of hybrid fiber reinforced ECC-NC composite beams

Flexural Performance of Layered ECC-concrete Composite Beam

Bending Performance of Steel Fiber Reinforced Concrete Beams Based on Composite-Recycled Aggregate and Matched with 500 MPa Rebars

Mechanical behavior of FRP sheets reinforced 3D elements printed with cementitious materials

Flexural performance of novel ECC-RC composite sandwich panels

Experimental investigation on flexural performance of concrete beams strengthened with SMA-GFRP-ECC smart composite materials

Numerical Simulation of Engineering Cementitious Composite Beams Strengthened with Fiber-Reinforced Polymer and Steel Bars

Flexural behavior of beams strengthened with GFRP bars and high‐performance fiber‐reinforced concrete

Performance of 3D-Printed Beams and Slabs Using Self-Sensing Cementitious Composites and DIC Method

Flexural bearing capacity of reinforced concrete beams reinforced with carbon fiber reinforced plastics strips and ultra-high performance concrete layers

Flexural Performance of CFDST Beams Using Recycled Aggregate Concrete

Experimental Investigation on Flexural Capacity of Reinforced Concrete Beams Strengthened with 3D-Fiberglass, CFRP and GFRP

Flexural capacity prediction of steel fiber reinforced concrete beam with recycled fine and coarse aggregate

Flexural behavior of over-reinforced beam with ECC layer: Experimental and numerical simulation study

3D FRP Reinforcement Systems for Concrete Beams: Innovation towards High Performance Concrete Structures

Flexural Properties of ECC-Concrete Composite Beam

Triaxial compressive behavior of 3D printed PE fiber-reinforced ultra-high performance concrete

Flexural Performance of Rectangular Cfst Members