Abstract:3D printing of continuous carbon fiber reinforced thermoplastic (CFRTP) composites is increasingly under development owing to its unparalleled flexibility of manufacturing 3D structures over traditional manufacturing processes. However, key issues, such as weak interlayer bonding, voids between beads and layers, and low volume ratio of carbon fiber, in the mainstream fuse deposition modeling (FDM) and extrusion suppress the applications of these techniques in mission‐critical applications, such as aerospace and defense. This communication reports a novel approach, inspired by laminated object manufacturing (LOM), for 3D printing of continuous CFRTPs using prepreg composite sheets. The prepreg sheets are successively cut based on the sliced CAD geometry, and then bonded layer upon layer using a CO2 laser beam and a consolidation roller system. The void content is low by computed tomography scans and interlaminar bonding strength is as high as conventional autoclave method by lap shear strength tests. The excellent interfacial bonding strength and high volume ratio of continuous carbon fiber contribute to the highest reported tensile strength (668.3 MPa) and flexural strength (591.16 MPa) to date, for all 3D printed CFRTPs. Moreover, the proposed technique also enables controlling the alignment of carbon fiber in printed layers. CFRTPs with unidirectional [0°]s, cross‐ply [0/90°]s, and [0/‐45/0/45°]s fiber reinforcement are produced and evaluated for mechanical properties. The proposed 3D printing method is broadly beneficial for industries requiring high performance and lightweight structural materials with complex geometries. A mechanism to 3D print ultrahigh strength carbon fiber reinforced polymer (CFRP) composites capable of achieving aligned continuous carbon fiber reinforcement is presented. The mechanical properties are superior to the existing 3D printed CFRP materials due to an excellent interfacial bonding and minimal void content. During this laser assisted 3D printing technique, temperature at the material interface reaches well above the matrix melting point.

3D printing of FRP grid and bar reinforcement for reinforced concrete plates: Development and effectiveness

Behavior of 3D-printed HPC plates with FRP grid reinforcement under bending

Mechanical behavior of FRP sheets reinforced 3D elements printed with cementitious materials

3D FRP Reinforcement Systems for Concrete Beams: Innovation towards High Performance Concrete Structures

An overview of recent advancements in fibre-reinforced 3D printing concrete

3D Printed Concrete Walls Reinforced with Flexible FRP Textile: Automatic Construction, Digital Rebuilding, and Seismic Performance

Triaxial compressive behavior of 3D printed PE fiber-reinforced ultra-high performance concrete

Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction

Bond Performance Between BFRP Bars and 3D Printed Concrete

3D-printing ultra-high performance fiber-reinforced concrete under triaxial confining loads

Interfacial constitutive model of 3D printed fiber reinforced concrete composites and its experimental validation

Investigation of steel wire mesh reinforcement method for 3D concrete printing

In-process reinforcing method: dual 3D printing procedure for ultra-high performance concrete reinforced cementitious composites

Flexural performance of 3D-printed composite beams with ECC and recycled fine aggregate concrete: Experimental and numerical analysis

Study on anisotropy of 3D printing PVA fiber reinforced concrete using destructive and non-destructive testing methods

Recyclable thermoplastic FRP bars for reinforced concrete structures: Current status and future opportunities

PVA Fibre Reinforced High-Strength Cementitious Composite for 3D Printing: Mechanical Properties and Durability

Fine-Grained Polymer-Cement Basalt Fibrous Concrete for 3D Printing

Shear Performance of 3D Printed Concrete Reinforced with Flexible or Rigid Materials Based on Direct Shear Test

The Influence of Three-Dimensionally Printed Polymer Materials as Trusses and Shell Structures on the Mechanical Properties and Load-Bearing Capacity of Reinforced Concrete

3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites