Abstract:The optimization of drift region specific ON-resistance (${R} _{on,sp}$ ) for superjunction (SJ) MOSFETs with three-dimensional (3-D) and insulator-pillar (${i}$ -pillar) concepts is proposed and compared with the two-dimensional conventional SJ (2-D C-SJ) MOSFETs. With the constraints of avalanche breakdown and critical depletion, the optimized ${R} _{on,sp}$ and the corresponding design parameters are numerically determined. For the 3-D concept, a superior ${R} _{on,sp}$ can be obtained only for a high breakdown voltage (BV) or a low pillar aspect-ratio (AR) due to the better charge compensation. The junction field-effect transistor (JFET) effect induced by the lateral pillars depletion exceeds the charge compensation due to the stronger electric field crowding effect. For the ${i}$ -pillar concept, parasite depletion is alleviated due to an additional voltage sustained across the insulator pillar, especially for a narrow SJ pillar. The optimization design for the 650-V class SJ MOSFETs with 3-D and ${i}$ -pillar concepts demonstrates an optimized ${R} _{on,sp}$ with 3.99 $ ext{m}Omega cdot $ cm2 at AR = 10 and 1.40 $ ext{m}Omega cdot $ cm2 at AR = 70 can be obtained in 3-D ${i}$ -pillar SJ (3-D I-SJ) and 2-D ${i}$ -pillar SJ (2-D I-SJ), respectively. For the 650-V class SJ MOSFETs, 3-D and 2-D I-SJ structures have a lowest ${R} _{on,sp}$ than the other structures for AR less and greater than 57, respectively. The charge imbalance effects of BV for these structures are also discussed.

Experimental and Theoretical Study on Failure Mechanism of Superjunction MOSFET under H3TRB Testing

Analysis of Electro-Thermal-Stress Failure of the Ldmos Fet under Hpm Pulses

Failure Analysis and Improvement of Superjunction MOSFET under UIS Stress Condition

Dv/dt Induced Failure and Improvement of Power Superjunction MOSFET

Influence of the Filling Holes on the High Temperature Characteristics of Deep Trench Superjunction MOSFET

Gate Oxide Failure Mechanisms of SiC MOSFET Related to Electro-Thermomechanical Stress under HTRB and HTGB Test

Investigating the Failure Mechanism of Short-Circuit Tests in 1.2-Kv SiC JBS-Integrated MOSFETs

Fabrication and Optimization of a High-Reliability 700 V Super-Junction MOSFET with Segmented P-Buried RESURF Termination

Experimental Investigation on Failure Mechanism of SiC Power MOSFETs under Single Pulse Avalanche Stress

Experimental and Theoretical Study on EMI Noise of Superjunction MOSFET with Different Pillar Doping

Comparative Study on the Total Ionizing Dose Effects of the Superjunction and the Conventional Power MOSFETs

Over dV/dt Robustness of Switching Behavior of SiC MOSFET and a Novel Main Junction Region Design

High temperature behavior of multi-region direct current current–voltage spectroscopy and relationship with shallow-trench-isolation-based high-voltage laterally diffused metal–oxide–semiconductor field-effect-transistors reliability

Investigation of SiC Trench MOSFETs' Reliability under Short-Circuit Conditions

A Novel Superjunction Mosfet with Improved Ruggedness under Unclamped Inductive Switching

Investigation and Failure Mode of Asymmetric and Double Trench SiC Mosfet S under Avalanche Conditions

Investigations on the Degradation of 1.2-Kv 4H-Sic Mosfets under Repetitive Short-Circuit Tests

A Novel Super-Junction DT-MOS with Floating p Regions to Improve Short-Circuit Ruggedness

Investigation of Failure Mechanisms of 1200V Rated Trench SiC MOSFETs under Repetitive Avalanche Stress

Optimization and Comparison of Specific ON-Resistance for Superjunction MOSFETs Considering Three-Dimensional and Insulator-Pillar Concepts

Investigation and Failure Mode of Asymmetric and Double Trench SiC mosfets Under Avalanche Conditions