Abstract:Nowadays the development of high-field magnets strongly relies on the performance of superconducting materials. Iron-based superconductors exhibit high upper critical fields and low electromagnetic anisotropy, making them particularly attractive for high-field applications, especially in particle accelerator magnets, nuclear magnetic resonance spectrometers, medical magnetic resonance imaging systems and nuclear fusion reactors. Herein, through an industrially scalable and cost-effective manufacturing strategy, a practical level critical current density up to 1.1x10^5 A/cm2 at 4.2 K in an external magnetic field of 10 T was achieved in Cu/Ag composite sheathed Ba0.6K0.4Fe2As2 superconducting tapes. The preparation strategy combines flat rolling to induce grain texture and a subsequent hot-isostatic-pressing densification. By varying the parameters of rolling, the degree of grain texture was engineered. It is found that the transport properties of the Ba1-xKxFe2As2 tapes can be enhanced by applying a large amount of deformation during rolling, which can be attributed to the improved degree of c-axis texture. Microstructure characterizations on the highest-performance tape demonstrate that the Ba1-xKxFe2As2 phase has a uniform element distribution and small grains with good connectivity. Grain boundary pinning is consequently enhanced as proved by large currents circulating through the sample even at 25 K. Our work proves that Cu/Ag composite sheathed Ba1-xKxFe2As2 superconducting tapes can be a promising competitor for practical high-field applications in terms of the viable, scalable and cost-effective fabrication strategy applied and the high transport properties achieved in this work.

Investigation of Normal Zone Propagation Velocity in AgSn/Ag/Ba122 Superconducting Tapes Using a Conduction Cooling Test System

The experimental research and analysis on the quench propagation of YBCO coated conductor and coil

High Transport Current Superconductivity in Powder-in-tube Ba0.6K0.4Fe2As2 Tapes at 27T

Research on Insulation Technology for Nb3Sn Layer Coil of Superconducting Conductor Testing Facility

Study of air heat treatment on Bi-2223/Ag superconducting tapes

Study on the Formation of the Liquid Phase During Heating Process of Bi-2223/Ag Superconducting Tapes at Various Oxygen Partial Pressure by Using in Situ Resistance Measurement

Investigations on Quench Recovery Characteristics of High-Temperature Superconducting Coated Conductors for Superconducting Fault Current Limiters

Experimental study on the an-isotropic critical current of REBCO tape

Investigation on the Phase Transformation of Bi-2223/Ag Superconducting Tapes During Heating

Low field anomaly in the critical current of Ba1‐xKxFe2As2 tapes

Experimental Study of the Test System for Hts Bi2223/Ag Tapes under Tension

An Experimental Investigation of Critical Current and Current Distribution Behavior of Parallel Placed HTS Tapes

The Influence of Tape Arrangements on the Critical Current of Bi-2223 Superconducting Current Leads

Investigation of real-time strain responses of the insulating system of superconducting magnets by using fiber Bragg grating sensors

Development of high-performance iron-based superconducting wires and tapes

High-performance Ba1-xKxFe2As2 superconducting joints for persistent current operation

Contactless Measurement of Critical Current of High Temperature Superconductor Tape by Magnetic Circuit.

Analysis of normal zone propagation in pancake-shaped Nb/sub 3/Sn superconducting magnet

High-performance Ba1-xKxFe2As2 superconducting tapes with grain texture engineered via a scalable and cost-effective fabrication

STUDY ON THE PERFORMANCES OF SEVERAL LAMINATED Bi-2223/Ag HIGH TEMPERATURE SUPERCONDUCTOR TAPE COMPOSITE STRUCTURES

Spatial modulation of Joule losses to increase the normal zone propagation velocity in (RE)BaCuO tapes