Abstract:Numerical models for computing the effective critical current of devices made of HTS tapes require the knowledge of the Jc(B,theta) dependence, i.e. of the way the critical current density Jc depends on the magnetic flux density B and its orientation theta with respect to the tape. In this paper we present a numerical model based on the critical state with angular field dependence of Jc to extract the Jc(B,theta) relation from experimental data. The model takes into account the self-field created by the tape, which gives an important contribution when the field applied in the experiments is low. The same model can also be used to compute the effective critical current of devices composed of electromagnetically interacting tapes. Three examples are considered here: two differently current rated Roebel cables composed of REBCO coated conductors and a power cable prototype composed of Bi-2223 tapes. The critical currents computed with the numerical model show good agreement with the measured ones. The simulations reveal also that several parameter sets in the Jc(B,theta) give an equally good representation of the experimental characterization of the tapes and that the measured Ic values of cables are subjected to the influence of experimental conditions, such as Ic degradation due to the manufacturing and assembling process and non-uniformity of the tape properties. These two aspects make the determination of a very precise Jc(B,theta) expression probably unnecessary, as long as that expression is able to reproduce the main features of the angular dependence. The easiness of use of this model, which can be straightforwardly implemented in finite-element programs able to solve static electromagnetic problems, is very attractive both for researchers and devices manufactures who want to characterize superconducting tapes and calculate the effective critical current of superconducting devices.

The Influence of Tape Arrangements on the Critical Current of Bi-2223 Superconducting Current Leads

An Experimental Investigation of Critical Current and Current Distribution Behavior of Parallel Placed HTS Tapes

Influence of Torsional Strain on the Bi-2212 Tapes and Round Wires under Background Field

Influence of the voltage taps position on the self-field DC and AC transport characterization of HTS superconducting tapes

The influence of the first heat-treatment on the critical current density of (Bi,Pb)-2223/Ag superconducting tapes

STUDY ON THE PERFORMANCES OF SEVERAL LAMINATED Bi-2223/Ag HIGH TEMPERATURE SUPERCONDUCTOR TAPE COMPOSITE STRUCTURES

Experimental study on the an-isotropic critical current of REBCO tape

Strongly enhanced current densities in Sr0.6K0.4Fe2As2 superconducting tapes

Investigate on the Application of Elliptical Drawing Dies During the Manufacturing Process of Bi-2223/Ag Superconducting Tapes

Low field anomaly in the critical current of Ba1‐xKxFe2As2 tapes

High Transport Current Superconductivity in Powder-in-tube Ba0.6K0.4Fe2As2 Tapes at 27T

Double-Spiral Current Leads of Bi-2223 Tapes for A Smes Magnet

Large transport critical currents of powder-in-tube Sr0.6K0.4Fe2As2/Ag superconducting wires and tapes

Interface effects on current transport properties in multi-layered (Ba, K)Fe2As2 superconducting wires

Improving phase transformation and superconducting performance of Bi-2223 tapes via Cu addition

Development of high-performance iron-based superconducting wires and tapes

Contactless Measurement of Critical Current of High Temperature Superconductor Tape by Magnetic Circuit.

Simulation of Ferromagnetic Shielding to the Critical Current of Bi2223/Ag Tape under External Fields

Voltage–current Property of Two HTS Tapes Connected by Ordinary Sn–Pb Solder

The Effect of Hot Isostatic Pressure on the Microstructure and Critical Current of Bi-2223/Ag Superconducting Tapes

Self-consistent Modeling of the $I_c$ of HTS Devices: How Accurate do Models Really Need to Be?